Martes, Hunyo 30, 2015

Ignition question..

Ok so my question revolves around a garden tractor. I know it's probably fairly uncommon here but it does run on 12VDC so the principles are the same as a car or any other low voltage application.

Long story short, I have a tecumseh engine that originally ran a Solid State Ignition (SSI) that has failed. Following Ed Stoller @Circuit Diagram & Explanation instructions I wired up Option 1, then Option 2. Why? because for some reason I cannot get more than 6.5vdc at the coil + post. Going with Option two eliminated the aged key switch. So as it sits right now I have Battery to ballast resistor (1.4ohm) input, to Coil +.. Measuring at ballast input I read 12.4vdc, at coil + I read 6.5vdc.


Now quite literally the physical chain is (using brand new 14gauge wire, 120v rocker switch, ballast resistor and automotive ignition coil) battery, rocker switch, ballast input, coil +

Surely 1.4ohms is not enough to halve 12 volts right? Any suggestions on what the problem could be?

19+ Free Tools to Start Your Podcast From Scratch

“Slack is starting a podcast for some reason.”

That was the headline of a recent Fortune.com article. Author Tom Huddleston, Jr. wondered why Slack, “a hot Silicon Valley company with a fast-growing valuation,” would “make the most of its ever-growing momentum” by launching a podcast.

But to content marketers, Slack’s move isn’t surprising at all.

The podcast world has recently exploded. Since 2008, the number of Americans tuning in each month has doubled—from 9% to 17% in January 2015.

And companies are paying attention. Many sponsor podcasts as part of their efforts to hook new customers; according to the Boston Globe, businesses will soon be spending $100 million on podcast ads.

If you’re thinking of using podcasts to promote your company, there’s another option—following Slack’s lead and creating your own podcast. As Kevan Lee explained in his Podcasting for Beginners post, audio is just another tool in the content marketing toolbox.

podcasting tools

Not only can you establish your company as a thought leader in its industry or field, podcasts can help you create a personal relationship with your audience, enhance your brand visibility, and reinforce your company’s story and mission.

You might be thinking, “Yeah, starting a podcast is great if you’re a big company with a huge advertising budget, but there’s no way I can afford to do it for my own business.”

Not so fast. There are a ton of free resources out there to help you get your podcast off the ground. With this guide, you’ll see how to launch your show with an (almost) zero-dollar budget.

Planning and creation tools

1. Capturing ideas: Evernote

PD 1

It’s probably safe to assume you’ve heard of Evernote. However, you might not have considered using it to jumpstart your podcast. The tool is perfect for jotting down your show ideas while you’re out and about or brainstorming.

In addition, you can use it to take notes while you interview people, which will come in handy during the editing process and when you put together show notes.

2. Script-writing and collaboration: WriterDuet

PD 2

Why might you need a script?

Well, it might not take a village to make a podcast, but it does take at least two people: you, your co-host(s), and hopefully some guests. And the more participants you have, the harder it is to keep your discussion on-topic and within your desired time range. A script will mitigate those problems by giving you some structure.

WriterDuet is an excellent script-writing software. Not only does it let multiple people work on your script at the same time, it logs every user’s edits and even lets you explain your changes with in-line video chats, text messages, and notes. As a result, you and your collaborators will literally be on the same page.

3. Scheduling: Doodle

PD 3

When it comes to planning when you’ll record or live-stream your podcast, Doodle is a great tool. You set up a poll with multiple dates and times and then invite the other people involved with your podcasts to choose when they’re available. Once they do so, you can easily choose the time that works for everyone.

Doodle even connects with your calendar app so you don’t have to manually enter the event in your calendar once the date and time have been set.

In-the-studio tools

4. Sound dampening: soft furniture

As Daniel J. Lewis explains in his excellent article, “25 Free Podcasting Tools as Good as Their Paid Alternatives,” many of the places people commonly record their podcasts—like their basements, offices, or closets—have a lot of reverberation and echoing, which inevitably affects your audio.

If you don’t have access to a sound-proof studio, Lewis recommends putting soft furniture in the room where you’re recording. You can even hang blankets on the walls.

5. Interviewing/co-hosting: Skype

PD 4

Using Skype to podcast is super common, and for good reason: it’s a pretty straightforward process.

While Skyping with your fellow podcasters (whether they’re your co-hosts, your guests, or some combo of the two), you record your conversation via a computer app. Skype Call Recorder and Audio Hijack 3 are free options for Windows and Mac computers, respectively.

After you’ve finished, you can edit what you’ve recorded with an audio editor. (More on that in a bit.)

6. Live-streaming: Google Hangouts On Air

PD 5

Maybe you’d like to live-stream your episode, then convert it to a podcast. With Google Hangouts On Air, you can invite up to 10 people to a video meeting that’s also a live public broadcast.

Your Hangout will automatically be converted into a video after you’re done. To make it a podcast, grab the audio from the video file using software like Pazera Free Audio Extractor or AoA Audio Extractor.

7. Call recording: Google Voice

PD 6

If you’re a really low-budget podcaster, consider using Google Voice to record a conversation between you and your co-host or guest. After you create an account and enable call recording, all of your incoming calls will automatically be converted to MP3 files. Yup, you read that correctly—the app only works for incoming calls. Either arrange to have your co-host use Google Voice to record your call, or ask others to call you.

8. Voicemail service: SimpleVoiceBox

PD 7

Many podcasters play recorded questions or comments from listeners during their show. If you’re interested in doing this, use SimpleVoiceBox to set up a voicemail service with a unique number your listeners can call. The system will hold an unlimited number of messages—plus, those messages can easily be downloaded into .WAV format.

Editing and post-production tools

9. Recording and editing: Audacity and GarageBand

Editing your podcast is as simple or as complex as you make it. Daniel Lewis recommends only editing out distractions—in other words, you don’t have to get rid of “ums, “ahhs,” or long pauses, as long as those mistakes don’t detract from what you’re saying.

Even if you’re a minimalist editor, you’ll probably still want to trim the ends and add in other audio, such as theme music, songs, or sound effects.

Audacity is a solid option if you’re on a budget. Its interface isn’t super intuitive, but you’ll find many step-by-step guides for using it (like this one or this one.)

Mac users can take advantage of Garageband. “Garageband is free with most Macs, and it’s an incredibly capable audio editor with everything a podcaster could need,” explains MakeUseOf writer James Bruce.

Audacity and Garageband also both offer recording options. If you’re going to be the only person talking for the entire episode, than you can skip the Skype or Google Hangouts step and simply record directly into your editing program.

10. Audio post-production: Auphonic

You can use Audacity or Garage Band to clean up your audio, but when you want it done professionally, take advantage of Auphonic’s free two hours of processed audio per month. The software will balance the levels between speakers, music and speech; normalize volume to broadcast standards; balance multiple tracks (for example, your recording with your co-host’s recording); encode your files, and more.

11. Music and sound effects: Freesound, Free Music Archive

PD 8

Wondering where you’ll get that theme song or bleep noise? Freesound has a huge database of audio snippets, samples, and recordings.

The Free Music Archive also offers a wide selection; plus, you can browse by genre, so if you already know a blues song would be just perfect for your intro, it’ll be that much easier to find the perfect one. (Just make sure it’s labeled as available for commercial use.)

MP3s, tagging and transcribing

12. MP3 encoding: iTunes

After you’ve finished editing your podcast and adding sound effects, you’ll need to turn it into an MP3. There’s online software for MP3 conversions, but iTunes can do the same thing—and for free.

After exporting your file into iTunes, all you have to do is right-click on it and choose “Create MP3 version.”

(This article will walk you through the process.)

13. ID3 Tagging: EasyTAG, Podcast Tag Editor

ID3 tags allow you to embed important information in your audio files, including episode name, podcast name, episode content, and cover art.

Not only do iTunes and Windows Media Player use these tags to organize your podcasts, but having tags ensures even people who download your audio file from random places on the internet will know what they’re listening to.

In addition, maybe you’d like to include show notes—the text that pops up when you click the “Information” icon in the Apple podcast app.

To make these, just write the text of your choice in the “Comments” section of the ID3 tagging software you use.

14. Transcribing: Express Scribe Free

PD 9

There are a couple different reasons to transcribe your podcasts.

First, transcriptions are SEO gold-mines. Search engines can crawl and pick up your podcast’s title, description, and tags—but not your audio. A transcript, on the other hand, is easily searchable.

Second, having a transcript gives you more than one way to disseminate your material. Maybe you want to turn your podcast into a blog post, or a SlideShare, or even an infographic. All of those will be easier if you’ve got a written version of each episode.

The free version of Express Scribe helps you transcribe audio files with its customizable playback speed, “Hotkeys” (which make a mouse unnecessary), and speech recognition software.

You can also add hyperlinks to your transcript and post it on your blog or site, which will appeal to the people who would rather read than listen (they exist!)

Finally, you can use your transcript to keep track of important moments. Many podcasters label these milestones in their show notes.

Marketing and promotion

15. Getting into the iTunes store: WordPress

It’s pretty simple to get your podcasts in the iTunes store via WordPress. Using a WordPress site you already have or one you’ve created, create a category for your podcasts—like “Podcasts.” Then copy the URL for the Podcasts category. You’ve just created an RSS feed: a technology that announces updates to a website. Apple uses this RSS feed to create a collection of your podcast episodes. To submit the feed to Apple, paste the URL into the “Submit a Podcast” Podcast Quick Links in the Podcast section of iTunes.

Then, each time you complete an episode, upload the MP3 into a new post on WordPress, assign it to the Podcasts category, then publish it.

Once you’ve submitted the RSS feed URL to iTunes, all of the posts marked “Podcast” will automatically be submitted for review by the iTunes staff and then uploaded to the iTunes store.

(For a more detailed version of these instructions, check out the WordPress tutorial.)

16. Checking your RSS feed: Feed Validator

PD 10

But before you can submit that RSS feed link, you need to check and make sure it’s working. This is simple to do: just enter the URL into Feed Validator.

17. Social media scheduling: Buffer

PD 11

After all the hard work that goes into creating a podcast, you’ll definitely want to attract as many listeners as possible. Buffer’s Individual Plan lets you connect your Twitter, Facebook, Google+, and LinkedIn accounts (for a total of four), and schedule 10 posts at a time for each.

So let’s say you’re releasing your podcast on Thursday at noon. You could use Buffer to post three “teaser” posts on each social media platform leading up to the launch, a post with the link to the podcast once it goes live on Thursday, and then four or five posts over the weekend reminding your followers to listen and give feedback.

Not only does this save you a ton of time, but you can see analytics for each channel. That’ll give you valuable insight into how many podcast listeners you’re getting from, say, LinkedIn versus Facebook.

18. Emailing: MailChimp

PD 12

Many podcasters use a regular newsletter to deepen their relationship with listeners. Not only can you promote new episodes, but you can gather audience feedback, direct people to relevant links (say, your site or sponsor sites), and even give away exclusive content.

With MailChimp’s free plan, you can send up to 12,000 emails to 2,000 subscribers.

19. Analytics and stats: Blubrry

To get some basic statistics on your podcast, sign up for Blubrry’s free service. All you have to do is add your podcast to Blubrry’s directory—which has the added bonus of exposing your program to more potential listeners. There’s only one caveat, however: your podcast can’t advertise a competing podcast service.

Where to spend money on your podcast

1. A mic

As Ryan Imel explained on WPCandy, “Technically you can use your computer’s default microphone to record your podcasts. And by technically I mean your voice will travel through the air, collide with your computer and be recorded into a file.”

According to Imel, virtually any microphone you buy will be better than the one on your computer.

The Rhode Procaster ($229) is a popular choice, as is the Blue Yeti ($129).

2. Podcast cover art

Unless you’re a graphic designer, you may want to consider hiring a professional for your artwork.

Not only will amateur-looking cover art turn off potential subscribers, Apple won’t feature your podcast in its “New & Noteworthy” section if it doesn’t have an attractive image. Apple recommends including a title, brand, or source name.

There are also some size and resolution guidelines you should be aware of, courtesy of Libsyn:

  • iTunes Podcast- 1400×1400 at 300 dpi
  • iPhone Display – 160 dpi
  • iPhone App Image requirement – 512×512 pixels at 160 dpi
  • iPad Display – 132 dpi

If the initial artwork you create is large (1400 x 1400 at 300 dpi), it can easily be scaled down to fit all these mediums.

To find a designer, check out Fiverr, 99 Designs, Elance, or LogoMaker.

3. Podcast hosting service

There are three main ways to get your podcast online.

Host it yourself for free

You can use WordPress to host your podcast for free as I describe above. Here’s the problem with this approach: if you solely use WordPress, your audience is almost guaranteed to have a sub-par experience. Not only will the site take forever to load, but downloading the audio files will be time-consuming as well.

Use WordPress to set up your RSS feed and submit your podcasts to the iTunes Store, but if customers want to directly download your podcasts, it’s great to provide a different option.

Why not host your podcast on your own site? Well, web hosts aren’t designed for files with unpredictable downloading behavior. Your site has a limit on how much data can be transferred at any given time; if you have a bunch of people trying to download your podcast in the day or two after it’s released, they may crash your server.

Purchase a hosting service

The second option is to purchase a web hosting service, like BlueHost or HostGator. If you get the basic version of BlueHost, it’s $3.50 a month. Your Amazon S3 rates will change depending on how much bandwidth and storage you use every moth, but in general, it’s pretty inexpensive.

These services aren’t designed for hosting media files, so if you’re getting more than 100 downloads per episode, you’ll also need to purchase a media hosting service, such as Amazon S3. You’ll also need to configure the software yourself.

Pay for podcast hosting

The third and most straightforward option is paying for a podcast hosting service.

Both Libsyn and SoundCloud have a lot of reach—which means lots of listeners—a factor that might weigh heavily in your podcast hosting decision.

Libsyn hosts more podcasts than any other service in the world. For $5 a month, you’ll get 50 megabytes of storage; for $15, you’ll get 250. In addition, it’ll automatically create a RSS feed for you (so you can skip the WordPress process.) The HTML5 Media Player is another cool feature–it allows you to embed your podcast anywhere on the web.

Particularly if podcasting is going to be a big part of your marketing strategy, SoundCloud is worth looking into. Every time you upload an episode of your podcast to SoundCloud, it’ll be pushed out to iTunes as well. SoundCloud’s Pro plan, which offers six hours of upload time per month, is $55 a year. For $135 a year, you can upload as much audio as you’d like.

Libsyn, SoundCloud, and most other podcast hosts include download and audience statistics in their services. Knowing how many downloads you’re getting and from what media sources, what part of the world your listeners are coming from, and even which web pages or apps your podcasts are being played from will help you tailor your podcast to your listeners.

Do you have any free resources to add to this list? What about paid tools that are worth their price tags? I’d love to hear your picks in the comments!

The post 19+ Free Tools to Start Your Podcast From Scratch appeared first on Social.

Lunes, Hunyo 29, 2015

Recessed lighting above couch

Hello, we are finishing our basement and I've already drywalled, painted, etc. When I installed my recessed lighting, I wanted some lights over the couch because we dropped the ceiling down for a heating duct. The drop ceiling is drywalled and about 6ft tall above the couch. I installed 4" HALO recessed cans above the couch. These lights are linked to 5 other 6" cans on a dimmer.
When I did this, I'll admit I didn't place the cans far enough away from the seating area so the lights will be almost over your head when sitting down. I was limited because of the ductwork. Dumb I know, but nothing I can change now.

That's the background information. Now I am to light bulbs. I bought a 4" led light and trim kit that would match the rest of my 6" recessed lighting. When I flipped the switch on, these lights are way too bright. So I bought Par16 350 lumen lights. These are much better but still a bit bright.

Is there anything I can put in these cans that will give off a very low light and still be dimmable? The couch is in my home theater area and I would like to dim for movies, etc.
I've attached a picture.

Thanks for the help!
Name:  image.jpg
Views: 0
Size:  19.4 KB
Attached Images

Linggo, Hunyo 28, 2015

Backup Generator Problem

I have a backup generator that was installed by an electrician about 5 years ago. Everything was done to code, I have a lockout switch that prevents power from being fed back into the grid. The power cord plugs into my generator and the I have a twist and lock connection on the side out the house. Anyway, tonight the power went out and I went through the usual process of converting over to generator power. As soon as I attempted to plug the power cable into my generator, it drew down as if it were under an immediate load and popped the breaker on the generator. I double checked that all the circuit breakers in the service panel were off. Why would I be drawing a load when nothing is on? Any suggestions on what to check first? I opened the plug on the outside of the house and the service pane inside, everything looks like it should. Any suggestions would be greatly appreciated.

Sabado, Hunyo 27, 2015

Platinum Woodscapes

This is Platinum Woodscapes newly designed work truck. Don’t miss them when you’re out on the road!
Woodscapes

Treating the water in a portable evaporative cooler water tank

Hi,

I have an Arctic Cove 500 CFM portable swamp cooler.

The owners manual states that every time I am not using the cooler I must drain all of the water out of it to discourage undesirable bacteria growth.

Well the unit is heavy and it will be a real pain to always have to drain the water out ever time. So I was wondering if I could treat the water instead and drain it less frequently. I have researched the topic online and I have got contradictory information.

I read that I can treat the water with one teaspoon of household bleach per gallon of water, but then someone else said doing that would damage the cooler.

I also searched Amazon for a commercially available water treatment product but couldn't find any specifically for swamp coolers but did find some treatments for humidifiers.

So can anyone help me with this? What about bleach? What about some commercial product I don't know of, or could I concoct a homemade product that would do the trick? Or is there no solution other than draining the water every time?

Thanks very much.

John

Olivia Chow not ruling out federal election run


Surge in NDP support and dip for Liberals has raised the hopes of Toronto New Democrats who would like to see her run in Spadina-Fort York.

Biyernes, Hunyo 26, 2015

NDP’s Bobbi Stewart’s vehicle graphic 2015

Bobbi Stewart and the NDP campaign came to us with a vehicle graphic to promote their riding in the upcoming election.
We created a simple graphic that fit within their campaign budget and the client was ecstatic.BobbiStewart

I pad Mini 2 wireless storage

Just recently I ordered an IPad Mini 2 from a survey place as a gift to me. I have always wanted a mini computer better than an old Dell Axim I own. Just recently I learned that the IPads do not have a USB port. I have heard about a wireless storage device though that Sandisk makes and want to know if anyone else has used this.

I might use cloud storage and do have a a free drop box account but I would also like to be able to use some kind of local storage that is portable like with the Sandisk. I suppose I could link my new Ipad to a Windows computer and save some things that way perhaps through Team Viewer? Or even without Team Viewer?

I would also like to be able to use Skype too to make phone calls if needed and I am wondering if that is possible? Also is there a way to add a keyboard that screen is small but is all that I could afford in points at the time. Thank you for your help!:)

Easy Mason Jar Flag Centerpiece

This Fourth of July, celebrate Old Glory with this unique red, white and blue floral centerpiece, in which flowers in mason jars come together to form the flag. Not only does it make a patriotic table decoration, the individual mason jar arrangements...

TCHC clears interim CEO after misconduct allegation


The scandal-plagued social housing provider says interim CEO Greg Spearn did not break rules

The Biggest Social Media Science Study: What 4.8 Million Tweets Say About the Best Time to Tweet

Imagine removing all guesswork when you schedule your tweets, knowing the times that work for maximum clicks and maximum engagement.

As someone who shares frequently to social media, this info would be fantastic to have! We’re always eager to dig up new research into social media best practices—things like length and frequency and timing.

The timing element, in particular, feels like one where we’d love to dig deeper. And we just so happen to have a host of data on this from the 2 million users who have signed up for Buffer!

With a big hand from our data team, we analyzed over 4.8 million tweets across 10,000 profiles, pulling the stats on how clicks and engagement and timing occur throughout the day and in different time zones. We’d love to share with you what we found!

best time for twitter

The best time to tweet: Our 4.8 million-tweet research study

Our key learnings

Wow, we learned so much looking at the awesome stats from those who use Buffer! Here were some of the takeaways we came up with. I’d love to hear what catches your eye, too!

  • Early mornings are the best time to tweet in order to get clicks.
  • Evenings and late at night are the best time, on average, for total engagement with your tweets
  • In some cases, the most popular times to post are opposite of the best times to post.
  • Popular times and best times to tweet differ across time zones.

The most popular time to tweet:

Noon to 1:00 p.m.

We’ve taken the data from all tweets sent through Buffer to find the most popular times for posting to Twitter. Looking at all tweets sent across all major time zones, here is an overview of the most popular times to tweet.

  • Noon to 1:00 p.m. local time, on average for each time zone, is the most popular time to tweet
  • The highest volume of tweets occurs between 11:00 a.m. and 1:00 p.m., peaking between noon and 1:00 p.m.
  • The fewest tweets are sent between 3:00 and 4:00 a.m.

Here’s the chart for the most popular times worldwide, taken from an average of 10 major time zones (the times represent local time).

Most Popular Time to Tweet Worldwide

Here is the graph for the most popular times to tweet in each of the four major U.S. time zones. 

Buffer social media science study - US popular times to tweet

(We normalized the data to account for daylight’s savings in the U.S. as well.)

Here are the charts for the major time zones in Europe and Africa.

Most Popular Time to Tweet Europe

(Note: The London (GMT) time zone used to be the default time zone for new Buffer users, so our data for GMT is not as clean as we would like it to be. We’ve omitted any takeaways for GMT from the research results here.)

Here are the charts for the major time zones in Asia and Australia.

Most Popular Time to Tweet Australia Asia

It’s interesting to see how the most popular time to tweet varies across the time zones. We’ve shared Buffer’s 10 most popular time zones in the charts above. Here’s a list of each most popular hour for the 10 major time zones.

  • Los Angeles, San Francisco, etc. (Pacific Time): 9:00 a.m.
  • Denver (Mountain Time): noon
  • Chicago (Central Time): noon
  • New York, Boston, Atlanta, Miami, etc. (Eastern Time): noon
  • Madrid, Rome, Paris, etc. (Central European): 4:00 p.m.
  • Cape Town, Cairo, Helsinki, etc. (Eastern European): 8:00 p.m.
  • Sydney (Australian Eastern): 10:00 p.m.
  • Hong Kong (Hong Kong Time): 8:00 a.m.
  • Tokyo (Japan Time): 2:00 a.m.
  • Shanghai, Taipei, etc. (China Time): noon

For any clarification on this or the other research throughout this article, feel free to leave a comment and we’ll get right back to you.

Takeaways & thoughts:

  • The most popular time to post could be due to a number of factors: This is when most people have access to Twitter (perhaps at a work computer), this is when online audiences are most likely to be connected (see Burrito Principle), etc.
  • Should you post during the most popular times? That’s one possibility. Also, you may find success posting at non-peak times, when the volume of tweets is lower.
  • If you have a large international audience on Twitter, you may wish to locate the particular part of the world where they’re from, and adjust your schedule accordingly. You can find the times when your audience may be online with tools like Followerwonk and Crowdfire.

The best times to tweet to get more clicks

We were excited to dig into the specific metrics for each of these tweets, too, in hopes of coming up with some recommendations and best practices to test out for your Twitter strategy.

First up, the best time to tweet for clicks.

Looking at the data, we found the following trends for maximizing your chance to get more clicks:

  • Tweets sent between 2:00 and 3:00 a.m. earn the most clicks on average
  • The highest number of clicks per tweet occurs between 2:00 a.m. and 4:00 a.m., peaking between 2:00 and 3:00 a.m.
  • The fewest clicks per tweet happen in the morning (when tweet volume is particularly high), between 9:00 a.m. and 1:00 p.m..

The data in the below chart is the worldwide average, calculated for the local time in each time zone. So the peak at the 2:00 a.m. hour would hold true as the overall top time no matter which time zone you’re in—2:00 a.m. in Los Angeles, New York, Cape Town, Hong Kong, etc.Best Times to Tweet for Clicks Worldwide

For the specifics on each of the best time to tweet for clicks in each of the major time zones in Buffer, here’s a breakdown.

  • Los Angeles, San Francisco, etc. (Pacific Time): 2:00 a.m.
  • Denver (Mountain Time): 7:00 p.m.
  • Chicago (Central Time): 2:00 a.m.
  • New York, Boston, Atlanta, Miami, etc. (Eastern Time): 11:00 p.m.
  • Madrid, Rome, Paris, Berlin, etc. (Central European): 2:00 a.m.
  • Cape Town, Cairo, Istanbul, etc. (Eastern European): 8:00 p.m.
  • Sydney (Australian Eastern): 2:00 a.m.
  • Hong Kong (Hong Kong Time): 5:00 a.m.
  • Shanghai, Taipei, etc. (China Time): noon
  • Tokyo (Japan Time): 8:00 a.m.

Best Times to Tweet for Clicks - by time zone

Takeaways & thoughts:

  • Clicks was far and away the largest engagement metric that we tracked in this study (compared to retweets, replies, and favorites).
  • Some of the recommended best times for individual time zones show that non-peak hours are the top time to tweet for clicks. This data may reflect some particularly high-achieving posts—some outliers—that bring up the average when the volume of tweets is lowest. Still, it’d be a great one to test for your profile to see what results you get.
  • One neat thing to keep in mind is that a non-peak hour in, say, Los Angeles may correspond to a peak hour in London or Paris. The worldwide audience is definitely one to consider when finding the best time to tweet.

The best times for overall engagement with your tweet

We define engagement as clicks plus retweets, favorites, and replies. When looking at all these interactions together, we found the following trends for maximizing your chance to get the most engagement on your tweets:

  • Tweets sent between 2:00 and 3:00 a.m. earn the most total engagement on average
  • The highest amount of engagement per tweet occurs between 11:00 p.m. and 5:00 a.m., peaking between 2:00 and 3:00 a.m.
  • The smallest amount of engagement happens during traditional work hours, between 9:00 a.m. and 5:00 p.m.

Best Times to Tweet for Engagement

Takeaways & thoughts:

  • The best times to tweet for engagement are quite the inverse of the most popular times to tweet. (The late-night infomercial effect—tweet when fewer people are tweeting—seems to be the case here.)

The best times for retweets and favorites on your tweets

Adding together two of the most common engagement metrics, we found some interesting trends for maximizing the retweets and favorites on your tweets, especially for those with a U.S. audience.

Looking at 1.1 million tweets from U.S. Buffer users from January through March 2015, here were some of the notable takeaways we found:

  • Tweets sent at the 9:00 p.m. hour in the U.S. earn the most retweets and favorites on average
  • The highest number of retweets and favorites occurs between 8:00 p.m. and 11:00 p.m., peaking between 9:00 and 10:00 p.m.
  • The lowest retweet-favorite engagement happens at 3:00 a.m.

(Interesting to note, the takeaways from this data compared to the worldwide engagement data differ slightly for a couple reasons: 1) clicks represent a huge portion of overall engagement, and 2) the worldwide vs. US datasets vary.)

Best Times to Tweet for Engagement USA

We’d love to make it easy for you to share these results with your audience, your friends, your clients—anyone you think might benefit from them.

>> Download every chart from this post (.zip) <<

The methodology for our research

We studied all tweets ever sent through Buffer—4.8 million tweets since October 2010!

Based on this sample set, we looked at the number of clicks per tweet, favorites per tweet, retweets per tweet, and replies per tweet, in accordance with the time of day that the tweet was posted to Twitter.

Further, we segmented the results according to time zones, based on the assumption that the learnings might be more actionable if they could be specific to exactly where you live and work.

We had an interesting opportunity to consider whether median or average would be the better metric to use for our insights. It turns out that so many tweets in the dataset receive minimal engagement that the median was often zero. For this reason, we chose to display the average.

Over to you: What are your takeaways?

We’re so grateful for the chance to dig into the stats from the many tweets that people choose to share with Buffer. The data is super insightful, both for sharing with others and for impacting our own social media marketing plans!

What did you notice from the stats here?

Did any of the results surprise you or get you thinking about your plans in a different way?

I’d love to hear your take on this! Feel free to share any thoughts at all in the comments!

Image sources: IconFinder, Blurgrounds, Death to the Stock Photo, UnSplash

The post The Biggest Social Media Science Study: What 4.8 Million Tweets Say About the Best Time to Tweet appeared first on Social.

Huwebes, Hunyo 25, 2015

Garage Door makes loud sound when closing

My quantum (Wayne Dalton) garage door has suddenly started making a loud grinding type noise only when it closes. The door opens just fine and only makes this sound right as it closes. The sound seems to be coming from the powerdrive. Everything else seems to be fine, it's just the loud noise that is concerning. I've lubricated the tracks, joints, and gears. I also played with the force adjustment and train open/close settings to no avail.

Can anyone provide their thoughts as to what the problem may be?

Thanks.

Woodbine casino debate likely to focus on jobs


Andray Domise says Rexdale needs a boost, but the health board chair says casino jobs would not help the area.

Miyerkules, Hunyo 24, 2015

Tackling poverty a 'litmus test' for city’s greatness, Tory says


Mayor agrees the city must strive to improve the quality of life for all, but stops short of endorsing a “living wage” rule, saying senior governments must help.

How to choose a PVC/Vinyl fence

I'm getting quotes for a new vinyl 6' privacy fence to replace a wooden one, but I really don't know how to decide. I'm asking the fence companies to give me links to the product they use. Any good recommendations?

This Everguard fence is one I got back. It's "reinforced" at the bottom which would prevent the centers from bowing and separating from the top, which I see sometimes. The specs say posts should be cemented and even filled in on corners and gates. If that's all included, the higher price they quoted sounds fair, although it's really hard to drop money on boring fence!

https://www.merchantsmetals.com/everguard

20 DIYs to Organize Your Home in Style

Declutter your space without sacrificing your sense of style. These simple projects will help you take your space from chaotic to neat-and-tidy on a budget.

Martes, Hunyo 23, 2015

How to Choose the Right Stock Photo for Your Next Project

You’ve likely got a great way to search the web for the best free stock photos.

And once you know where to look, how do you decide which photos to choose?

Should you go with abstract or specific?

What is the best color profile?

What is the best orientation?

There are so many great sources for free photos. I find myself asking these questions most every time I pick a photo—how to identify the right stock photo for a project. There’s a good bit of research and advice out there on how to make the best choice when it comes to stock photos. Take a look at what I’ve found here.

Choose the Right Stock Photo

1. Know where your image is going

How will you use the photo? Where will the photo appear?

There’re a million different places an image could appear, based on the million or more types of projects that involve stock photography.

Let’s consider online content for a moment.

When we look at the different places that a stock photo may appear, there’s often a handful that come to mind most often:

A full-width image in the header

Examples of this include stories on Medium and popular blogs like Crew or Zapier.

Medium screenshot

A background image as part of a graphic, behind text or icons

Examples of this include the images we create for Buffer blog posts and some great designs on blogs like Copyblogger and Agora Pulse.

Copyblogger screenshot

Right-aligned images inside blog posts

Examples include The Social Times blog. (The image could also be left-aligned, too, though the far more common usage is right-aligned.)

The Social Times blog

Full-width images inside blog posts

Examples include the Unbounce blog and the Quick Sprout blog.

Quick Sprout blog

Social media featured images

Examples include Facebook and Google+ when you share a link and Twitter when you’ve enabled Twitter cards.

Facebook example

Slidedeck backgrounds

Lots of great examples on SlideShare.

SlideShare example

In each of the examples above, it’s possible that a different stock photo would be considered an ideal fit, based on what looks good with text on top of it, what looks good splashed on Facebook, or what looks good at the start of a blog post.

In my experience, I’ve seen stock photos commonly used in one of two ways. Either

  1. On their own as standalone images
  2. With text or graphics placed on top, as designed images

Both are great routes forward, especially considering the unique places these images are used online. Once you figure out where your image is going and how it will be used, you’re certain to have a greater sense of what’s right stock photo for your project.

2. Understand the contrast of your image

Identify areas of low contrast if you plan on adding text or graphics to the image

Let’s say you want to add an overlay onto your image—a catchy quote with Pablo or an announcement blurb and graphic over a cool background.

The ideal stock photo for these projects would be one with areas of low contrast so that your text and graphics have an even, consistent backdrop.

The SlideShare blog has a good example of how contrast affects the design of image. SlideShare refers to those images with areas of low contrast as text-friendly images.

Good example:

Good1

Bad example:

Bad1

Put another way, these ideal stock photos with areas of low contrast make it possible that your text and graphics will have high contrast with the photo.

For instance, an image with many shades of blue could be said to have low contrast. If you were to add white text on top, the white text would have high contrast with the blue image.

If you always add white text to your images, look for images with darker colors.

If you’ve grabbed a black icon from a site like The Noun Project, you’ll want to place it on an image with lighter tones.

One way to look at contrast in this sense is to picture the color wheel. Selecting colors that are opposite one another on the wheel creates a contrasting effect. You can choose an ideal stock image that focuses on one color and text and graphics that focus on an opposite one.

color_contrast_and_dimensions

Legibility and clarity are key here. Typically when you create an image with text, graphics, or other elements overlaid onto a photo, the most important visual aspect of your image will be your enhancements, not the stock photo itself.

You don’t need to think much about the content of the picture—especially if you’ll be adding strong effects like blur or darken/lighten.

You’ll just want something that has the right contrast to make your added elements pop.

Another trick I like to try, when possible, is to add an image to my photo editor (Canva, typically) and change the image to black-and-white. Usually quite quickly I can tell if the image has high or low contrast within its colors.

(You’ll also grow to notice the right contrast rather intuitively over time.)

Where this becomes important is when you begin to place elements on top of the image. Text, for instance, has the chance to be difficult to read if you’re placing it over contrasting colors—white text could disappear over the white parts of the image yet still look just fine over the darker colors, for instance.

3. Choose colors that elicit a visceral response

Attention-grabbing colors & images will stand out on social

Visceral reactions are some of the strongest connections we can make to visual content.

Biologically, when we feel a visceral reaction, we tap into the part of the brain responsible for survival instincts and fight-or-flight responses. The response is subconscious. It originates from the central nervous system whenever we’re stimulated by vital factors like food, shelter, danger, or reproduction. We might not be able to explain why we love a beautiful design because our conscious thought hasn’t yet caught up with our subconscious.

And one of the ways to drive these visceral reactions is with color choice.

A study from Georgia Tech looked at 1 million Pinterest images for the color trends between the highest and lowest shared images. They found:

  •    Red, Purple and Pink promote sharing
  •    Green, Black, Blue and Yellow all stop people from sharing

The thinking was that the three highly-shared colors—red, purple and pink—are tied to visceral emotions. And the overall takeaway is that color makes for a huge portion of an image’s success.

To find an ideal stock photo that’s rich with attention-grabbing color, you can again turn to contrast—in particular, the seven color contrasts identified by Johannes Itten.

  1. Pure (hue) contrast
  2. Light-dark contrast
  3. Cold-warm contrast
  4. Complementary contrast
  5. Simultaneous contrast
  6. Contrast of quality (color saturation)
  7. Contrast of quantity

(For more detail on each of these seven, I’d highly recommend this blog post from Love of Graphics.)

Two of Itten’s seven color contrasts that stand out to me when choosing stock photos are contrast of saturation and contrast of hue. The Color at Play blog created some great examples of these contrasts in action.

Contrast in saturation

Print

Example:

photo-1429616588302-fec569e203ce

Contrast in hue

Print

Example:

photo-1429000263672-1b8b4008d2f7

4. Find an image that supports your message

Attention-grabbing images are great, so long as they don’t distract

In most cases, stock photos are generic and abstract enough that they can grab attention without diverting too much focus.

There are, however, exceptions.

Simply, when choosing a stock photo, find one that does not distract from the main message of your article, update, or headline.

Typically, distracting images would be those that have one or more of these qualities:

  • Controversial
  • Loud, garish
  • Too specific
  • Recognizable
  • Meme

Here’s an example of one that I used in a story. The image was probably a bit too specific—a football game, fans dressed in white, lettering in the end zone—and on looking back at it now, my mind immediately begins trying to figure out just who those teams are (instead of focusing on the cool article).

Facebook example post

5. Take care to pick a person

What to consider when picking a photo with a person

There’s been some neat research about this question. What effect is there, if any, should you choose a photo with a person?

Turns out, there are a lot of different ways to include a person in your picture.

  • Looking away from camera vs. looking at camera
  • Back of head vs. face
  • Shadow/silhouette
  • Pics of arms, legs, or bodies

A brief overview of some case studies on the topic reveals these findings:

37 Signals Person Page test

eye tracking study stock photos with people

6. Be mindful of the size and shape

Which orientation do you want? Tall vs. wide vs. square

One factor that might sway your decision one way or another is the size and shape of an image. In general, these are the ideal image sizes for each social network:

The commonly-held best practice is to aim for something like this:

  • Facebook & Instagram — square images
  • Pinterest & Google+ — tall images
  • Twitter — wide images

What happens if you fall in love with an image that isn’t the right size? 

There’s a fun tip we use here at Buffer for how to crop easily.

When you double-click to open an image on your Mac computer, you enter Preview, which contains several useful tools.

To crop, place your mouse over the picture and click and drag to select the area you want to keep. Then go to Tools > Crop (or press Command+K).

You can also resize large images from Preview by going to Tools > Adjust Size.

In this way, you can fall in love with just about any image and crop down to the size and shape you need.

7. How to perform a search

The best way to search for abstract photos

Many of our favorite free image sources have robust search features to help you dig through the photo archives.

Sometimes there can be a bit of an art to finding what you’re after.

If you’re writing an article about brand management, for example, it could be difficult to know which terms to use in your search; if you were to search for “brand” or “management,” the image results might be a bit lean and off-topic.

What we like to do in searches for the Buffer blog is to enter terms that have to do with the image we have in mind, rather than the title of the page itself.

  • For social media posts, we often look to find pictures of computers, laptops, mobile devices, or keyboards.
  • For analytics posts, we look for transportation, things with forward motion.
  • For research posts, we might search for books or pen and paper.

We also find that crowd shots or interactive photos with two or more people together make for good social media images.

What this might look like in practice:

  1. Search according to the verbs in your headlines or page titles, rather than the nouns
  2. Go to the thesaurus to find variations of your search terms (a simple thesaurus: Google search for “[keyword] synonym”)
  3. Search for nouns related to your verbs, e.g. “launch” could mean rockets or race cars

Over to you

What are your favorite tips for finding a great stock photo?

I’d love the chance to learn from you! Leave any thoughts here in the comments, and I’ll respond right away.

Image sources: Pablo, IconFinder, SlideShare, John Barsby Photography, Color at Play, UnSplash37 Signals, Eyequant

The post How to Choose the Right Stock Photo for Your Next Project appeared first on Social.