Huwebes, Abril 30, 2015

I dentifying component specs when label is missing or indiscernible?

2 items that I would love to be able to identify when the label or markings are of no help: 1. Fuses. Is there a way to determine the amp rating...

Tongue and Groove Ceiling question

Hello, I am new to this forum and had a question regarding T&G paneling for a ceiling. Hopefully I am posting this in the best spot. I am looking to put up T&G on my kitchen ceiling. I more than likely will be going with a 1x6 but was also considering a 1x4 but am worried it might look small. The room is about 18'x11'. My main question is regarding the length of boards. Am I risking warping by going with full length boards? 18's or 20's? I would assume it will obviously be a little harder to work with but like the look (and simplicity) of not having joints. I had read somewhere a while back that the longer lengths could be more susceptible to warping, is this true? Any help is greatly appreciated!

Cracks in Chimney Bricks: Repair or Replace?

One of my chimneys was recently repointed. The contractor was supposed to replace any bricks that needed to be replaced down to three courses from the top. When I recently went up on the roof, I discovered that bricks in the second and third courses were not replaced and still have cracks. Photos (with close-up) are below. Contractor is balking at tearing down the courses (and is not a bad guy, did other work on the house at a decent price)--so I'm wondering whether those bricks actually need to be replaced or whether they can just be filled in. Or maybe there's some other solution. Thank you very much for any input you can give. (Not sure if relevant but, the chimney is on an exterior wall. I live in Maryland, so it can get kind of cold and snowy at times.) Attachment 50037 (http://www.doityourself.com/forum/attachments/bricks-masonry-cinder-block-paving-walking-stones-asphalt-concrete/50037-cracks-chimney-bricks-repair-replace-pic-1-1.jpg)

Please help on pressure switch stuck closed

I have a nordyne/fridgidare l1ra 090c-12b furnace. When I turn the heat on the inducer kicks on followed by the igniter which then I hear a clicking noise followed by the igniter turning off and the control board giving me the pressure switch closed error. I have replaced the pressure switch and I am still having the same problem. Once in a while it will fire and heat the house but it very rarely happens? What else could it be other than the pressure switch

Water+Sunshine=Refrigeration

http://money.cnn.com/2015/04/07/smallbusiness/evaptainer-cooler/index.html

Calculating Roof Ventilation for Vaulted Ceilings

I've done a lot of reading on how to calculate proper roof/attic ventilation. All of the calculations start by figuring out the attic floor area required to vent by measuring the attic floor length and width, and multiply to get the area. I've got a 80 year old house with partially vaulted ceilings in two bedrooms upstairs, which means I've got a very small attic floor area above those. My question is, should I be using the full length and width of the roof (i.e. the upstairs floor space) to calculate my ventilation requirements or just my small attic space? I figure that I need the entire floor space. I have open soffits at the base of the roof, and have good space between the roof deck and insulation to get good airflow from the soffits, up the roof deck to the attic. I will be adding ridge-vents across the ridge of the roof, and installing round louvre vents between the rafters at the open soffits. I just need to know the proper attic area to use, so I can figure out how much net free area I need.

Lennox Safety Wiring Question

Hi everyone, so one of my guys installed an AC today on an existing Lennox G60DF-48C-110-10 furnace. The furnace would not come on in heat mode. The...

Pendant Light fix?!

Hi, new to the forum thanks to this reason. About 2 years ago purchased Tom Dixon pendant lights from a seller in Hong Kong, needless to say 2 of the lights stopped working thanks to the cheap plastic that held the bulb. Other than that, they look great. I reached out to a lamp repair place and they want $100 per light to fix (all 3 cost me $100), so before I trash them, I want to see if I can fix'em as I need the light! Here are some shots: Attachment 50028 (http://www.doityourself.com/forum/attachments/lighting-light-fixtures-ceiling-exhaust-fans/50028-pendant-light-fix-image2.jpg)Attachment 50029 (http://www.doityourself.com/forum/attachments/lighting-light-fixtures-ceiling-exhaust-fans/50029-pendant-light-fix-image1.jpg)

Mayor John Tory supports swapping some cops for civilians


Two-tiered policing, with lower-paid civilians used in jobs such as traffic control, may be inevitable to keep costs down, he says.

Just change "A" coil

Hi All, if an AC system is replaced with the same capacity (3 ton) can the "A" coil only be replaced instead of the whole Air handler ,which is in great condition,electric heat has never been used. Thoughts Geo

Urgent……..suction line copper question

Im installing a new condensing unit, had to relocate it outside from under the building.. I bought 30 feet of 1 ⅛ copper for the suction line…Im...

Thermostat says 75*F

Indoor stat says 75*F. Outdoor thermometer says 95*F at 4:30 in the afternoon. Gonna turn on the A/C and set it for 70 then jump in the shower. ...

Dryer Receptacle is RV Use Only?

I'm not sure if I'm missing something here, but I was just checking to see what kind of power cord I needed for a new dryer and saw that the receptacle in the laundry room is labeled "Recreational Vehicle Use Only." It also says 30A 125V. I just purchased this house and had an inspection done previously where this did not come up as an issue in the report. So, as someone who doesn't know a lot about dryer plugs: 1.) Is this the proper receptacle? If not, might there be any issues installing the correct one? There are no other similar receptacles in this laundry room. 2.) What kind of power cord do I need as I understand there are a couple different types. This is for a new Samsung DV42H5200EP Dryer. Thanks in advance for help with this question!

Leveling subfloor - 1/4 ply?

Is there any problem using 1/4" ply to build up an existing plank wood subfloor? The planks are 7-1/2"w x 3/4" set at 45 degrees diagonal to the joists. I want to use 1/4" to make the new floor level with flooring in the adjacent room i.e. want a level transition. Will the thin 1/4" ply create any unforeseen issues, even though I'm relying on it only for leveling? If its Kosher, then how would you attach the ply? 1" fully threaded screws every 6" on the edge and 8-10" in the field? btw: * the new hardwood (going over the planks+1/4 ply) is 3/4" solid hickory. * after reading other posts on the subject of sub-floors, I've decided NOT to use glue between the ply and planks, and NOT to nail the new ply through to the joists.

ice machine super heat

i have a ice machine,charged with 30oz. 404a, suction pressure 25 psi. temp -10. should super heat be around 20 deg. above saturation temp.

Ductless Heating Cooling: Three Separate Single Zone Units Vs One Three-Zone System

For a ductless heating cooling system like the Mitsubishi, can an installer comment on the relative efficiency of having a dedicated single zone...

Fence on a Concrete Grade Beam?

Hi there, new here, so bear with me, hopefully I didn't miss something in my search. What I'm wanting to do is erect a wooden fence on a small concrete wall. I'd only like it to stick up above the ground about 6 inches, and be at least 10-12 inches into the ground (stop a puppy that has a tendency to dig). It would be about 8 inches wide. What I don't know, is the specifics. I live in Saskatchewan, and am unsure about depth, or a footing underneath of it due to frost? Would that affect something like this? Or if I reinforce along the length with rebar would I be okay if built to that 10-12" depth on top of crushed stone? It would obviously have "piers" down 24-36" every 8' at the fence post locations. Thoughts, concerns, ideas?

UPDATED THE WALL OF SHAME

Hi everybody, I added four projects to the Wall of Pride, as shown on CB.com. Check it out!...

Laminate countertop miter seam

Does anyone have an idea of what I can use to fill the seam a little better and make it waterproof. The seam is 2 feet away from the sink. How can I protect it from a spill or when cleaning it with a wet rag. The piece were connected with Titebond 3 which is waterproof however this is a small gap, less than 1/32 of an inch. That is the closest I could get them lined up together. I was thinking of just putting a strip of scotch tape? The seam is not really that big or deep to get a product to fill it. Thanks for any help in advanced Jay

Performance Guarantee for Repair

Hi- As a homeowner I am going to have a TXV and filter dryer replaced with new refrigerant. Where would I measure the the temperature...

Ice Dam Membrane on new roof

We live in Massachusetts and had our roof replaced this past September. I was told that the roofer was putting down a 6' wide ice dam membrane but with all the snow we had this winter, I had some pretty bad ice dams and water leaked into the house in four different places. Without ripping up shingles, is there a way to find out if the membrane was actually installed? Thanks for the help!

Niagara AX server & Java

I have a server running Windows Server 2012 with Honeywell WEBS AX Supervisor software installed on it. Everything was working fine until recently...

NG pressure / flow question

I had a 1/2" line split from my main supply in the garage that runs into my indoor fireplace (which is rarely used). I plan on heating my garage this winter, so I tee'd off a stick to that, as well as ran a 20' length to the opening of my garage doors so that it could feed my burner that I use to make beer. It's a pretty large burner, rated with propane and a 30psi reg. up to 200k btu. Amazon.com : Bayou Classic BG14 Banjo Burner 10 inch diameter : Grill Parts : Patio, Lawn & Garden (http://www.amazon.com/Bayou-Classic-BG14-Burner-diameter/dp/B0009JXYTG) That being said, I was using just that setup before I ran these pipes, and it would heat my 26 gallon kettle to a rolling boil pretty easily. I bought this to convert the burner to NG, but do not have a regulator (which I was under the impression that you didn't need, although in the directions it says something about a reg): HURRICANE NATURAL GAS CONVERSION VALVE | William's Brewing (http://www.williamsbrewing.com/HURRICANE-NATURAL-GAS-CONVERSION-VALVE-P2214.aspx)

Accidental Dislike removal

Changing the batteries in my mouse I accidentally clicked the Dislike button on a post that definitely didn't deserve it. Yes, I know this makes me...

Charging the AC, how do you know the quantity of freon being added?

This is just an aftermath, but I'm puzzled by what I was told. Had this guy come over for AC check/tune up on a rather chilly day, he measured the pressure of my ancient Rheem system outside, and it was showing around 40-45psi, and he told me the normal should be 65psi. He did admit that the low temperature (it was 50 F that day) will influence the reading as well. He told me he would drop by later and refill it for the cost of material, $65/lbs, and he said I probably would need 2 lbs. He came by a couple days ago, when temperature was 72 F. The reading actually climbed up to 60 psi, so he refilled it while watching the meter and made sure it was stable at 65-66 psi. Whole process was less than 10 min, and he said it was probably 1 lbs. I did ask why it was not proportional, compensating 20 psi calls for 2 lbs according to him last time, but this was only for 5 psi. But the fact that he kept his word to drop by, not charging another round of labor and seemed to know what he's doing, made me OK with the 1lbs price. But I'm puzzled, how would you know the quantity of freon that's added? The meter he used only showed pressure, it was all up to him to tell me how much I need. Thanks a lot.

Make developers dedicate space for affordable housing: councillor


Councillor Mike Layton would like to see the province and the city back what's called inclusionary zoning.

Dishwasher wiring

Can i Put a DW (1300w,12amp) on a circuit that was used before as a stove hood vent (the one that comes out of a counter top). it also has a 120v outlet attached for the gas range. The circuit is using 2 connected breakers (total 30amp). Can i modify it somehow to use for my DW? Thanks in advance.

TRANE-OUTDOOR UNIT TRIPPING

HEY GUYS...HOPING FOR A LITTLE HELP... 2012 MODEL#-4TWB3036B1000BA, TRIPPING BREAKER RANDOMLY. POWER WIRE IS 30FT LONG, #10 WIRE ON A 30AMP BREAKER....

patio cover

I am looking to build a cover over an existing concrete patio. the slab is 10 ft deep and 12 ft long. I am going to tie rafters to a ledger attached to the facia and rest them on a beam between 2 6x6 post set 11 ft apart. rafters will need to span 8 1/2 ft and will be on 16 in centers. my question is size of beam and rafters. I live in Texas , so there is no snow load to consider. It will have 5/8 plywood roof with roll roofing. thanks for your advice.

Small Flame at Fire Pit

I recently installed a fire pit fueled by natural gas. I have tied into the meter at the house with a 50' 3/8" hose running back to the fire pit. There is about an additional 35' of 3/4" pipe where the hose connects to the fire pit. I am getting very small flame at the fire pit. Any suggestions? Thanks Attachment 49975 (http://www.doityourself.com/forum/attachments/lawns-landscaping-outdoor-decor/49975-small-flame-fire-pit-img_2774.jpg) Attachment 49976 (http://www.doityourself.com/forum/attachments/lawns-landscaping-outdoor-decor/49976-small-flame-fire-pit-img_2783.jpg)

You Have $100 to Spend on Social Media Marketing. Here’s One Way to Spend It.

How big is your marketing budget?

I’ve heard of companies that spend millions on marketing. I’ve heard of others who spend zero (we skew toward the zero side at Buffer).

Regardless of how much you spend, you aim to spend it well. That’s why a hypothetical situation like the one here—what would you do with $100 to spend on social media marketing?—can be an extremely valuable exercise.

I have some ideas on what I’d do with the $100, ways to wring the most value ...

The post You Have $100 to Spend on Social Media Marketing. Here’s One Way to Spend It. appeared first on Social.

Goodman CTK02 losing time and date.

Hi all, I have seen on the last 2 power failures (over the last month) this t-stat has needed the time and date re-entered. The power failures were...

no sweat ... if possible

I am doing a remodel of a 1950's bathroom. I would like to put shutoffs on the sink faucet inlets. Current fitting is a sweated elbow (see pic). I would prefer to avoid sweating the connection so I tried a 3/8 compression valve (pic) but it leaks. I did try to torque is a bit with a wrench but still get a drip. The compression lines do not leak because they have a rubber seal face whereas the fitting does not. What options do I have to avoid sweating on a new elbow? O-ring in the compression fitting, adapter ...? Thanks.

Bicycle Frame

Hi guys, I wanted to show the change of the frame that I run on my wife's bike. I'm not an expert welder, but I am quite satisfied, the work performed in about 3 hours. Look your advice and opinions. https://www.youtube.com/watch?v=8YV_A4OIoTM

How to Create Boring-Industry Content that Gets Shared

Posted by ronell-smith

If you think creating content for boring industries is tough, try creating content for an expensive product that'll be sold in a so-called boring industry. Such was the problem faced by Mike Jackson, head of sales for a large Denver-based company that was debuting a line of new high-end products for the fishing industry in 2009.

After years of pestering the executives of his traditional, non-flashy company to create a line of products that could be sold to anglers looking to buy premium items, he finally had his wish: a product so expensive only a small percentage of anglers could afford them.

dog bored by content

What looked like being boxed into a corner was actually part of the plan.

When asked how he could ever put his neck on the line for a product he'd find tough to sell and even tougher to market, he revealed his brilliant plan.

"I don't need to sell one million of [these products] a year," he said. "All I need to do is sell a few hundred thousand, which won't be hard. And as far as marketing, that's easy: I'm ignoring the folks who'll buy the items. I'm targeting professional anglers, the folks the buyers are influenced by. If the pros, the influencers, talk about and use the products, people will buy them."

Such was my first introduction to how it's often wise to ignore who'll buy the product in favor of marketing to those who'll help you market and sell the product.

These influencers are a sweet spot in product marketing and they are largely ignored by many brands

Looking at content for boring industries all wrong

A few months back, I received a message in Google Plus that really piqued my interest: "What's the best way to create content for my boring business? Just kidding. No one will read it, nor share information from a painter anyway."

I went from being dismayed to disheartened. Dismayed because the business owner hadn't yet found a way to connect with his prospects through meaningful content. Disheartened because he seemed to have given up trying.

You can successfully create content for boring industries. Doing so requires nothing out of the ordinary from what you'd normally do to create content for any industry. That's the good news.

The bad news: Creating successful content for boring industries requires you think beyond content and SEO, focusing heavily on content strategy and outreach.

Successfully creating content for boring industries—or any industry, for that matter—comes down to who'll share it and who'll link to it, not who'll read it, a point nicely summed up in this tweet:

So when businesses struggle with creating content for their respective industries, the culprits are typically easy to find:

  • They lack clarity on who they are creating content for (e.g., content strategy, personas)
  • There are no specific goals (e.g., traffic, links, conversions, etc.) assigned regarding the content, so measuring its effectiveness is impossible
  • They're stuck in neutral thinking viral content is the only option, while ignoring the value of content amplification (e.g., PR/outreach)

Alone, these three elements are bad; taken together, though, they spell doom for your brand.

content does not equal amplification

If you lack clarity on who you're creating content for, the best you can hope for is that sometimes you'll create and share information members of your audience find useful, but you likely won't be able to reach or engage them with the needed frequency to make content marketing successful.

Goals, or lack thereof, are the real bugaboo of content creation. The problem is even worse for boring industries, where the pressure is on to deliver a content vehicle that meets the threshold of interest to simply gain attention, much less, earn engagement.

For all the hype about viral content, it's dismaying that so few marketers aren't being honest on the topic: it's typically hard to create, impossible to predict and typically has very, very little connection to conversions for most businesses.

What I've found is that businesses, regardless of category, struggle to create worthwhile content, leading me to believe there is no boring industry content, only content that's boring.

"Whenever we label content as 'boring,' we're really admitting we have no idea how to approach marketing something," says Builtvisible's Richard Baxter.

Now that we know what the impediments are to producing content for any industry, including boring industries, it's time to tackle the solution.

Develop a link earning mindset

There are lots of article on the web regarding how to create content for boring industries, some of which have appeared on this very blog.

But, to my mind, the one issue they all suffer from is they all focus on what content should be created, not (a) what content is worthy of promotion, (b) how to identify those who could help with promotion, and (c) how to earn links from boring industry content. (Remember, much of the content that's read is never shared; much of what's shared is never read in its entirety; and some of the most linked-to content is neither heavily shared nor heavily read.)

This is why content creators in boring industries should scrap their notions of having the most-read and most-shared content, shifting their focus to creating content that can earn links in addition to generating traffic and social signals to the site.

After all, links and conversions are the main priorities for most businesses sharing content online, including so-called local businesses.

ranking factors survey results

(Image courtesy of the 2014 Moz Local Search Ranking Factors Survey)

If you're ready to create link-earning, traffic-generating content for your boring-industry business follow the tips from the fictitious example of RZ's Auto Repair, a Dallas, Texas, automobile shop.

With the Dallas-Forth Worth market being large and competitive, RZ's has narrowed their speciality to storm repair, mainly hail damage, which is huge in the area. Even with the narrowed focus, however, they still have stiff competition from the major players in the vertical, including MAACO.

What the brand does have in its favor, however, is a solid website and a strong freelance copywriter to help produce content.

Remember, those three problems we mentioned above—lack of goals, lack of clarity and lack of focus on amplification—we'll now put them to good use to drive our main objectives of traffic, links and conversions.

Setting the right goals

For RZ, this is easy: He needs sales, business (e.g., qualified leads and conversions), but he knows he must be patient since using paid media is not in the cards.

Therefore, he sits down with his partner, and they come up with what seems like the top five workable, important goals:

  1. Increased traffic on the website - He's noticed that when traffic increases, so does his business.
  2. More phone calls - If they get a customer on the phone, the chances of closing the sale are around 75%.
  3. One blog per week on the site - The more often he blogs, the more web traffic, visits and phone calls increase.
  4. Links from some of the businesses in the area - He's no dummy. He knows the importance of links, which are that much better when they come from a large company that could send him business.
  5. Develop relationships with small and midsize non-competing businesses in the area for cross promotions, events and the like.

Know the audience

marketing group discussing personas

(image source)

Too many businesses create cute blogs that might generate traffic but do nothing for sales. RZ isn't falling for this trap. He's all about identifying the audience who's likely to do business with him.

Luckily, his secretary is a meticulous record keeper, allowing him to build a reasonable profile of his target persona based on past clients.

  • 21-35 years old
  • Drives a truck that's less than fours years old
  • Has an income of $45,000-$59,000
  • Employed by a corporation with greater than 500 employees
  • Active on social media, especially Facebook and Twitter
  • Consumes most of their information online
  • Typically referred by a friend or a co-worker

This information will prove invaluable as he goes about creating content. Most important, these nuggets create a clearer picture of how he should go about looking for people and/or businesses to amplify his content.

PR and outreach: Your amplification engines

Armed with his goals and the knowledge of his audience, RZ can now focus on outreach for amplification, thinking along the lines of...

  • Who/what influences his core audience?
  • What could he offer them by way of content to earn their help?
  • What content would they find valuable enough to share and link to?
  • What challenges do they face that he could help them with?
  • How could his brand set itself apart from any other business looking for help from these potential outreach partners?

Putting it all together

Being the savvy businessperson he is, RZ pulls his small staff together and they put their thinking caps on.

Late spring through early fall is prime hail storm season in Dallas. The season accounts for 80 percent of his yearly business. (The other 20% is fender benders.) Also, they realize, many of the storms happen in the late afternoon/early evening, when people are on their way home from work and are stuck in traffic, or when they duck into the grocery store or hit the gym after work.

What's more, says one of the staffers, often a huge group of clients will come at once, owing to having been parked in the same lot when a storm hits.

Eureka!

lightbulb

(image source)

That's when RZ bolts out of his chair with the idea that could put his business on the map: Let's create content for businesses getting a high volume of after-work traffic—sit-down restaurants, gyms, grocery stores, etc.

The businesses would be offering something of value to their customers, who'll learn about precautions to take in the event of a hail storm, and RZ would have willing amplifiers for his content.

Content is only as boring as your outlook

First—and this is a fatal mistake too many content creators make—RZ visits the handful of local businesses he'd like to partner with. The key here, however, is he smartly makes them aware that he's done his homework and is eager to help their patrons while making them aware of his service.

This is an integral part of outreach: there must be a clear benefit to the would-be benefactor.

After RZ learns that several of the businesses are amenable to sharing his business's helpful information, he takes the next step and asks what form the content should take. For now, all he can get them to promote is a glossy one-sheeter, "How To Protect Your Vehicle Against Extensive Hail Damage," that the biggest gym in the area will promote via a small display at the check-in in return for a 10% coupon for customers.

Three of the five others he talked to also agreed to promote the one-sheeter, though each said they'd be willing to promote other content investments provided they added value for their customers.

The untold truth about creating content for boring industries

When business owners reach out to me about putting together a content strategy for their boring brand, I make two things clear from the start:

  1. There are no boring brands. Those two words are a cop out. No matter what industry you serve, there are hoards of people who use the products or services who are quite smitten.
  2. What they see as boring, I see as an opportunity.

In almost every case, they want to discuss some of another big content piece that's sure to draw eyes, engagement, and that maybe even leads to a few links. Sure, I say, if you have tons of money to spend.

big content example

(Amazing piece of interactive content created by BuiltVisible)

Assuming you don't have money to burn, and you want a plan you can replicate easily over time, try what I call the 1-2-1 approach for monthly blog content:

1: A strong piece of local content (goal: organic reach, topical relevance, local SEO)
2: Two pieces of evergreen content (goal: traffic)
1: A link-worthy asset (goal: links)

This plan is not very hard at all to pull off, provided you have your ear to the street in the local market; have done your keyword research, identifying several long-tail keywords you have the ability to rank for; and you're willing to continue with outreach.

What it does is allow the brand to create content with enough frequency to attain significance with the search engines, while also developing the habit of sharing, promoting and amplifying content as well. For example, all of the posts would be shared on Twitter, Google Plus, and Facebook. (Don't sleep on paid promotion via Facebook.)

Also, for the link-worthy asset, there would be outreach in advance of its creation, then amplification, and continued promotion from the company and those who've agreed to support the content.

Create a winning trifecta: Outreach, promotion and amplification

To RZ's credit, he didn't dawdle, getting right to work creating worthwhile content via the 1-2-1 method:

1: "The Worst Places in Dallas to be When a Hail Storm Hits"
2: "Can Hail Damage Cause Structural Damage to Your Car?" and "Should You Buy a Car Damaged by Hail?"
1: "Big as Hail!" contest

This contest idea came from the owner of a large local gym. RZ's will give $500 to the local homeowner who sends in the largest piece of hail, as judged by Facebook fans, during the season. In return, the gym will promote the contest at its multiple locations, link to the content promotion page on RZ's website, and share images of its fans holding large pieces of hail via social media.

What does the gym get in return: A catchy slogan (e.g., it's similar to "big as hell," popular gym parlance) to market around during the hail season.

It's a win-win for everyone involved, especially RZ.

He gets a link, but most important he realizes how to create content to nail each one of his goals. You can do the same. All it takes is a change in mindset. Away from content creation. Toward outreach, promote and amplify.

Summary

While the story of RZ's entirely fictional, it is based on techniques I've used with other small and midsize businesses. The keys, I've found, are to get away from thinking about your industry/brand as being boring, even if it is, and marshal the resources to find the audience who'll benefit from from your content and, most important, identify the influencers who'll promote and amplify it.

What are your thoughts?


Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don't have time to hunt down but want to read!

Wiring in the Garage

I installed a gable fan in the attic last year. I used Romex (12 gauge). I will be installing a gable fan in the garage this year and I understand that Romex CANNOT be used in the garage unless it is behind drywall. I will be installing an electrical box on top of the drywall, over an existing box (single receptacle), which I will expand to two receptacles. Steel City 2-Gang Square Electrical Box-521711234EW-25R - The Home Depot (http://www.homedepot.com/p/Steel-City-2-Gang-Square-Electrical-Box-521711234EW-25R/202590467) From there, I think the option will either be conduit or armor cable, connected to this electrical box. Please provide your thoughts or recommendation? I am thinking of using armor cable but is there anything more I need to know? I google "armor cable" and AC and MC came up. Any pointers here would be appreciate it. Conduit in the garage just seems like an overkill. Thanks

Miyerkules, Abril 29, 2015

how can i identify wood siding?

I need to replace some siding,so i need to know what it is. Is there a website or something that can help me? Or should i just post pics here? I know it is not asbestos, fiber, composite. Guessing it is not cedar, no smell. Looks like just pine. Do they make them in just pine? In some spots, the paint has peeled off, but the siding does not appear damaged. Is there a non cedar, wood, weatherproof shingle? They are machine cut, uniform size. House is in CT. Built in 1965. Thanks

Trane C Wire

Working on getting a RTH9580WF installed on my Trane AC/Furnace. There is a terminal labeled C inside the unit and I have a 8 wire thermostat wire. So I wired the brown wire to the C terminal and proceeded to hook up the new thermostat and got nothing (no power at stat). Broke out the volt meter and with the furnace door switch activated I tested the C terminal in the furnace and got 0 volts. Went down the line and found 26v at the R terminal. Moved my brown wire down to R, tested voltage at the thermostat brown wire and get 26v at all times. Reconnected the new Honeywell and still nothing. I am suspecting a bad unit, but wanted to see what you guys think before I take this one back. I expected the C terminal in the furnace to be 24v, but I'm not getting it with my volt meter. The R terminal currently has only a water sensor connected to it. Here are the pictures. This picture was taken before I moved the brown wire from C to R. Image: http://i73.photobucket.com/albums/i204/tul9033/IMG_3448_zpsmfalxax8.jpg Image: http://i73.photobucket.com/albums/i204/tul9033/IMG_3450_zpsdh24wtpp.jpg

Nice drip leg

Nice drip leg. Not so sure about the rest of the install.

How does motor mount replacement relate to transmission?

I have a 92' Ford Ranger XLT with 2.9 V6. I need to get my original motor mounts replaced. I know they jack up the engine a little bit. Is there any chance of causing a problem with the auto transmission? Do they disconnect the trans? I just had trans rebuilt a second time under warranty.

Abb ACH 550 ?

do i land my start / stop on the e bypass board or the drive board, also, can i cycle the motor when in bypass.

Ceiling fan help??

I just moved into a new home and in the process the ceiling fan remote was thrown away making the whole thing useless. It has five blades, is white, and has three light settings. One for the starting as bottom light turns on, then top and bottom, then just top. Remote also told temperature and had 3 or 4 fan settings. I also can't seem to get the damn thing apart to even check the make number five people have tried to figure it out and we're all confused. The glass is frosted on top and bottom and is quite large. The blades are sandwiched in between the two pieces of frosted glass where the light comes out.

Meet Mark Saunders, Bill Blair redux: James


Carding will continue under Toronto’s new chief, which is exactly what the power players intended.

sleeve anchor length

hi, i have a question about the required length when using sleeve anchor i will be anchoring into bricks, which is around 2.5 inches in height. Should i get a 3" sleeve anchor, so the "sleeve" will go below the bottom of the brick? Or should i get something like a 1.75" so the sleeve will expand inside the brick itself? which one makes it tighter?

Mississauga council drops Lord's Prayer


Mississauga council has dropped the tradition of reciting the Lord’s Prayer

Bathroom sconce mounting issues

I hated the old sconce installed by the last owner, so I decided to remove the old bathroom sconce and mount a new one. In the process of doing so I ran into two issues. (1) After removing the old sconce, I noticed the porcelain wall tiles were not cut to a rectangular opening matching the size of the box behind, in addition, behind is a metal handy box. If it were me for a sconce I would mount a 4"x4" square box with a round mud ring...but OK. I could work with it and got everything wired, mounting the fixture bar was a bit tricky as I need to use extra long screws and thread in a pair of nuts to better secure the fixture mounting bar. Here are some pictures of what I am talking about. Image: http://i173.photobucket.com/albums/w67/143house/11th/IMAG2845_zpsalvikzwl.jpg Image: http://i173.photobucket.com/albums/w67/143house/11th/IMAG2846_zpslxtl8bfc.jpg

Open Ground series of outlets

I plugged in an APC surge protector to one of the outlets and noticed a red light on which says site wiring fault. So I plugged in my outlet tester and got open ground. I opened the outlet and everything looked ok two white wire connected on silver side of the receptacle,two black wires on the brass side and one ground wire on the green screw. I then went upstream and all the outlets in the same circuit had open ground. I checked the other outlets looked ok except for one the electrical box had three different wires coming in. The white,black and ground wires were connected separately and then pig tailed to the receptacle with one wire each. Is this wiring ok? could this type of wiring be the cause of the open ground light? I have attached images of the pigtailed outlet. I also went around the whole house and all the other outlets came up correctly wired. The house was built in 2008 if it matters. Thanks in advance. Attachment 49944 (http://www.doityourself.com/forum/attachments/electrical-ac-dc/49944-open-ground-series-outlets-img_20150429_163025.jpg) Attachment 49945 (http://www.doityourself.com/forum/attachments/electrical-ac-dc/49945-open-ground-series-outlets-img_20150429_163038.jpg) Attachment 49946 (http://www.doityourself.com/forum/attachments/electrical-ac-dc/49946-open-ground-series-outlets-img_20150429_163048.jpg) Attachment 49947 (http://www.doityourself.com/forum/attachments/electrical-ac-dc/49947-open-ground-series-outlets-img_20150429_163104.jpg) Attachment 49948 (http://www.doityourself.com/forum/attachments/electrical-ac-dc/49948-open-ground-series-outlets-img_20150429_163131.jpg)

Rotation of carrier 30rap100

Is the correct rotation for a carrier 30rap100 clockwise, hooking meter l1,l2, l3 from left to right on terminal block. Is this correct thanks

Special outlet with no gang box

Hi All, I have an outlet I want to replace. It is mounted on the side of a kitchen cabinet. The outlet is not mounted in a box, it seems to have its own little box on the back with all the connections inside. I'm having trouble finding another one. Does anyone know what these are called? I was going to just replace it with a 1 gang box and a standard outlet, but there isn't room behind it since there is a drawer there. There isn't even room for a low profile box so this unit seems to be my only choice.

Bacnet Honeywell Spyders

Been doing more offline programming of databases for jobs these days. I'm having issues with Honeywell Bacnet Spyders. Doing an offline discovery...

Kitchen Remodel Wiring

Here is the plan: 1. 48" stove dedicated on 50amp/240v 2. 48" fridge (10amps) and 3 outlets (pantry room) on 15amp 3. 48" hood (9amps) and 8 inside cabinets lights (puck) on 15amp 4. dishwasher (1300w, 12amps) dedicated on 15amp 5. main sink disposal (7amps) dedicated on 15amp 6. under cabinet microwave on island (1000w,14.5aamps) dedicated on 20amp 7. island sink disposal (7amps) and 4-5 GFCI (on island) outlets on 15amp 8. under cabinet lights (13 ft of rope light @12.2w/3.3ft) and recessed lights (12 led - 12w each) on 20amp

Federal CG-5050 Bakery Display Refer - design temperature?

I'm working on an old CG-5050 bakery display refer, was designed for R-12, someone previous converted it to hotshot, R414b. I've spent many hours...

Is fiberglass well water tank better?

Hi, We have a Well-x-trol WX-251 tank. It has a lot of rust due to condensation (please see pictures) http://i48.photobucket.com/albums/f245/Novice973/Water%20Tank/20150429_061414_zpsig7phbyk.jpg Does it look like it is time to replace the tank? The tank was built in 1997 and installed in 1998. Should we go with a fiberglass tank instead? I was told the fiberglass does not work as well as the Well-x-trol. Our water is very acidic. We are constantly replacing the copper pipe from the well to the PH balancer due to pin hole leaks. My husband wants to use PEX. I am concern of the chemicals that are leaked into the water. We will be adding a reverse osmosis system. Will that take care of the chemicals from the PEX? Thanks!

My Nasty Backyard Lawn

Hello there... I am having the major remodeling at my home. First things first I have to do is to clean and clear off the yards. Just need your advices and opinions of how I can do it in the easy way. Of course you might say, chainsaw will do it. Let me tell you little bit about my home. My grandparent bought this land and a old house when my mother was thirteen years old. The old house was destroyed and replaced a mobile home when I was in my childhood. One of these pictures has a old sidewalk and a step in the front yard, that used to be an old house! So, for long time, my families had a hard time keeping it up the place, and I've decided to move here and wanting to fix and refresh everything to keep the memories going. It's going to be interesting when the work is done. So! Here are several pictures and I'm sure you'll say that it look terrible! That is why I'm here to ask for all of your advices. I am going to start the backyard to cut all the baby trees and build two bonfire in my garden area and other side yard. By the way, I will have these project of all kinds in "My Project" whenever I get it together. Thanks! Image: http://s5.postimg.org/u0y5zn4yf/20150320_103536.jpg Image: http://s5.postimg.org/92my4fys7/20150320_103616.jpg

What Do You Guys Recommend To Crimp Refrigeration Lines

What tools do you guys recommend for crimping refrigeration lines, i.e. when changing out a pressure switch or hot gas valve on a Manitowoc ice...

"Cannibuster" new device is able to help cops find out who is driving stoned.

Finally we got something to detect those driving stoned on our roads. Great news I say. They should get the same treatment we give DUI offenders...

Pipe size for vertical discharge?

for the vertical portion of a sump pump discharge - what's the optimum pipe size for a 4000gph pump (at 10')? wider pipe allows more peak flow, but also presents more static head pressure against the pump, correct? once the discharge hits horizontal or downgrade slope wider is better, correct? the application is a back yard sump to drain the low spot that turns into a large pond during heavy rains. insufficient grade to gravity drain it. will involve pumping up hill about 120', at about 5' elevation change. then downhill 180' at 5' elevation change. plan is to pipe 1.5" uphill then change to 3" pvc for the downhill run, with a cleanout at the transition. I thought about going 2" for the uphill run, but am concerned that will slow down the pump due to excess back pressure.

Help choosing replacement for 14 yr old heat pump

I'm actively looking for someone to install a new heat pump in my 1971 house in suburban Washington, DC. Our current unit is a 14 year old 2.5 ton...

pipe size for vertical discharge?

for the vertical portion of a sump pump discharge - what's the optimum pipe size for a 4000gph pump (at 10')? wider pipe allows more peak flow, but also presents more static head pressure against the pump, correct? once the discharge hits horizontal or downgrade slope wider is better, correct? the application is a back yard sump to drain the low spot that turns into a large pond during heavy rains. insufficient grade to gravity drain it. will involve pumping up hill about 120', at about 5' elevation change. then downhill 180' at 5' elevation change. plan is to pipe 1.5" uphill then change to 3" pvc for the downhill run, with a cleanout at the transition. I thought about going 2" for the uphill run, but am concerned that will slow down the pump due to excess back pressure.

Sliding Pantry Shelves

I have found several posts on the subject, but nothing that meets quite what I am looking for. We have a pantry that has pretty deep shelving, which makes it hard to utilize the space entirely. I have found a few big box solutions, but they are silly expensive for the size of shelves that I have. I was wondering if anybody has any thoughts on building my own shelves to replace those that are there, adn installing slides on them. If possible, I would like to mount the slides to the cabinet via standards so I can rearrange if necessary. Thanks!

Houston, TX - Air Quality Need improvement

Hey all, First post here. My wife and i have a 1 story 2200 Sqft home in West Houston Hwy6 and i-10, and we are both severe allergy...

Retrofit Internet-based self monitoring without a fee?

I have a home with a wired alarm system that hasn't been used for quite some time. I'd like to upgrade it. I'm looking for solutions that would enable me to self monitor the status of the system and receive alerts by email or smartphone app without a monthly fee. Just something basic (zones and armed/disarmed, no cameras). I am not opposed to swapping out the panel and the controls. I've seen envisalink. This is not compatible with my system. I'd like to find a new panel with support for: * wired internet connection * around 50 existing window/door sensors and a couple of existing motion sensors * alerts: program email settings in the unit or use smartphone app * no monthly fee * (optional) touch screen controls

Police violence - another thought

I think about this fairly often - what if they recrouted for policeman and no one showed up? Cops have a tough gig. They face violence and death...

We Tried All the Best Pinterest Marketing Tips. Here’s What Worked.

Is your brand—personal or professional—on Pinterest?

Seventy million people are, with a large number of those being bloggers, companies, brands, and businesses. The opportunities to expand your reach and meet your audience are many on Pinterest, and they come in many unique ways. Though falling under the umbrella of social media marketing, Pinterest has its own special notes and best practices that help make it an extremely fun, exciting place to test, iterate, and add value to those on the network.

We’re quite new into ...

The post We Tried All the Best Pinterest Marketing Tips. Here’s What Worked. appeared first on Social.

Honeywell Spyder Engineering mode issue

I have a series of Honeywell Spyders that throw a NullPointerException when I try to put them in Engineering mode. Other Spyders on the same network...

A list of Hillary's sponsors

Clinton Foundation donor Gave between this much* And this much* Microsoft/Gates Foundation $26,000,000 No limit reported Walmart/Walton...

Carrier 48eje048

I worked on 15 years old Carrier 48eje048510gb. Unit has new control board. Unit set up to work with thermostat. On a call for cooling in a low...

Wall Painting Colors

*_Wall Painting Colors_* - Modern paint colors can update a home and make it feel fresh and new. Sometimes even considering moving when your house is due. If you decide to keep or sell, you should always do your contemporary rooms. Paint is an inexpensive way to bring a new range of color and life to a room. Attachment 49921 (http://www.doityourself.com/forum/attachments/painting-staining-all-interior-exterior-surfaces/49921-wall-painting-colors-wall-painting-colors-fileminimizer-.jpg) Neutral paint is popular both in modern and contemporary styles. When you look at modern paintings probably notice brightly colored splashes or range of black and white. Repainting the walls white for a crisp room that will work with your existing furniture. Taupe and pale green can make a bathroom feel like a spa. Chocolate brown is always a dead end, but bold and with personality. The color of the paint of the wall is the background of your space and spice with his artwork, accessories and furniture choices. Modern decor is to make a dramatic room that is habitable. Create this with bursts of color. Accessorize your room with bold illustrations and ceramics display collections. Orange pillow Add personality to a plain brown or white sofa. Add artwork to the floor with a geometric carpet in daring reds and oranges. A modern works even in an apartment, because it adds personality to the white walls. Choose a bold color for accessories like bright lime green or pink so small objects are not lost in the room. Bring color with accessories means you can easily move. You can even set new accessories for a different look each season. Wall Painting Colors - The colors of the modern children's room are more sophisticated than the blue paint and base rose. Bright colors can work for children or teens to your paint job will have more longevity. Orange, green and yellow are sexist but also gay. Make sure that the color does not overwhelm the space using parsimony with accessories or bedding. Bright white paneling will tone bold walls and give a feeling of space in the cabin.

Ombudsman report targets city security under Rob Ford


Report to be released Thursday says a security officer covered a CCTV camera to hide former mayor’s intoxicated state.

An Introduction to Schema.org Markup for Emails

Posted by kristihines

If you are a Gmail user, you have likely received some emails that stand out from the rest with a call to action button within the subject line.

If you've booked a flight recently, your airline may have sent you an email that includes an interactive way to view your travel plans.

Similarly, Google Inbox app users might have seen emails that look like this.


These calls to action are courtesy of Schema.org markup for email. Just like Schema.org markup for web pages helps web pages stand out in search results, Schema.org markup for emails helps certain emails stand out from the rest in your inbox.

The goal of email markup is to allow people to take action on emails as quickly and simply as possible. For marketers, there are both pros and cons of this feature. In this post, we're going to look at the email markup options currently available, who can use it, and if it's worth it.

Should you use email markup?

Email markup is currently available for Gmail email recipients only. The number of Gmail users was over 350 million in 2012. To determine whether you should use it, you shouldn't go off a three-year-old statistic, but rather a survey of your own email list or customer database.

Most email service providers (like GetResponse, shown in the example below) allow you to search your subscriber list for specific criteria. Search yours for emails containing Gmail to determine the number of Gmail addresses your emails reach.

Of course, this isn't the whole picture. There are likely more people that use Gmail for business with their own domains. So although their emails do not say Gmail, they open their emails in the Gmail web browser or app.

Another consideration for using email markup is tracking. If you rely heavily on the ability to track email opens and clicks to trigger autoresponders and other marketing automation actions, you may not want to give your subscribers the option to bypass opening your email and clicking on your link.

Once you've determined the approximate number of Gmail users you reach and whether you need the ability to track email actions, your next job is to see if you qualify to use email markup.

Register for email markup with Google

Before you can use email markup, you must register with Google. Google will check to make sure you meet email sender quality guidelines, bulk sender guidelines, and action / schema quality guidelines.

Here are some of the key guidelines you need to know. Emails must be authenticated via DKIM or SPF. The domain of your from email must match the signed-by or mailed-by header.

You must send a minimum of a hundred emails per day to Gmail users for a few weeks before applying. Google will want to see that you have a very, very low rate of spam complaints from Gmail recipients.

Bulk email guidelines include using the same IP address to send bulk mail, using the same from email address, only adding subscribers to your list that have opted in (preferably with a double opt-in or confirmation), and allowing list members to unsubscribe easily. These guidelines will not only help you get approved for use of email markup, but will also help your emails get delivered to more Gmail users without being marked as spam.

Action / schema guidelines boil down to making sure you use the appropriate action markup when possible. When an action markup is not available, or the process is more complex than can be handled inside Gmail, a go-to action should be used. Go-to actions should link directly to a page where the email recipient can complete the action as labeled on the call to action button.

An introduction to email markup actions

Actions created by email markup allow email recipients to interact with your business, product, or service within Gmail. There are currently four types of actions to choose from using email markup.

One-click actions

One-click actions are those where a task can be completed with one click within Gmail or Inbox. For example, when someone signs up for an email list, they need to confirm their subscription.

One-click actions are broken into two categories: confirm actions and save actions. The above example is a confirm action. Save actions can include adding an item to a queue or saving a coupon. Both confirm and save actions can only be interacted with once.

RSVP actions

RSVP actions allow email recipients to confirm whether they will attend an event using an invite from Google Calendar. Your email will include the event card you usually see in emails from meeting invites.

Having people confirm their attendance to your event will help ensure that they don't forget by getting it on their calendar.

Review actions

Review actions allow email recipients to add a star and comment review for your business, products, and services right from the subject line of their email in Gmail.

You can see an end-to-end example of the scripting necessary to create a review action for a restaurant to get reviews from a Gmail user's inbox to the Datastore using Python.

Go-to actions

Actions that do not fall under the above types are considered go-to actions. These are used when you need to take an email recipient to your website to complete an action that is too complex to be handled within the recipient's Gmail or Inbox app.

All of the following are examples of go-to actions that take email recipients to do things on another website.

The call to action on these can be customized, so you are not limited to just viewing orders, tracking packages, and opening discussions. You can tailor them for specific uses, such as resetting a password, reviewing questionable transactions on your credit cards, and updating payment information.

An introduction to email markup Highlights

Another use for email markup is Highlights. Highlights summarize key information from specific types of email for users of the Inbox app. For example, Highlights are used for these order confirmations to show the products ordered.

Another example is this flight reservation using Highlights to show the round-trip flights purchased.

Specifically, there are six Highlights that businesses can use. They are as follows:

  • Flight reservations - Includes options for displaying basic flight confirmation information, boarding pass, check-in, update a flight, cancel a flight, and additional options. This Highlight is also supported in Google Now.
  • Orders - Includes options for displaying basic order information, view order action, and order with billing details.
  • Parcel deliveries - Includes options for displaying basic parcel delivery information and detailed shipping information.
  • Hotel reservations - Includes options for displaying basic hotel reservation information, updating a reservation, and canceling a reservation. This Highlight is also supported in Google Now.
  • Restaurant reservations - Includes options for displaying basic restaurant reservation information, updating a reservation, and canceling a reservation. This Highlight is also supported in Google Now.
  • Event reservation - Includes options for basic event reminders without a ticket, event with ticket & no reserved seating, sports or music event with ticket, event with ticket & reserved seating, multiple tickets, updating an event, and canceling an event. This Highlight is also supported in Google Now.

Note that while Highlights are a great feature, they only work for Gmail Inbox users. If Google continues to push Gmail users to using Inbox, this user base will grow exponentially.

Test email markup before sending

While you are waiting to be registered with Google, or prior to sending out emails with Schema.org markup, you should run some initial tests to ensure that your markup is correct. You can start by copying and pasting your code into the Email Markup Tester to check for basic errors.

You can also add email markup to emails you send from and to yourself on Gmail. It's important to test as one of the action / schema guidelines is a low failure rate and fast response for action handling. You can learn how to send test emails to yourself in this tutorial using script.google.com.

The tutorial gives you some simple code you can copy and paste as directed.

When you save and run the project as directed, you will immediately get the following result:

You can then begin to experiment with the code for the email markup you want to use.

Run your script again and again to produce new emails.

Any approved business can use the go-to actions to link the subject line of their email to any portion of their website. As you continue to experiment, think of new ways to engage your audience with email markup.

Final questions to answer

Here are some final questions you need to answer before you invest in email markup are the following.

  1. Will you get more of your desired results by adding Schema.org actions to your emails? For example, if you use the review action, will you actually get more reviews for your business?
  2. How much time will it take to revise your emails if / when Google standardizes email markup with Schema.org? It might pay to wait until email markup has been standardized and make the time and coding investment all at once.
  3. Will email actions be supported by other email platforms in the future? Schema.org is a collaboration between Google, Bing, Microsoft, Yandex, and Yahoo. So while not guaranteed, it can be assumed that all of the major email platforms on the web could embrace email markup in the future.

If, after answering these questions, you can see a real need for email markup, then find out if you meet the guidelines set by Google to use it and register.

If your business uses email markup, be sure to share your experiences and results in the comments!


Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don't have time to hunt down but want to read!

Appion core removers for mini splits

Does anyone have them? How do they stand up? I am thinking of picking up a set and a regular set also, since a lot of the business is mini splits...

Martes, Abril 28, 2015

Help with removing overly heavy wall texture

I just purchased a home that has some pretty heavy wall texture applied to several of the walls. Looks like someone bought one of those texture design rollers from menards, put tons of mud on the wall and went to town! It is so thick it spikes out from the walls at least a 1/2 to 3/4 inch in most areas. It has several coats of paint over it. I need to know the most effective way to scrape this smooth?? doing it with hand scrapers does not seem doable or desirable. Is there a tool that exists that I could buy or rent to get this accomplished? Anyone else ever dealt with this? Thank you in advance! Frank

Service Boat Setup... ideas Needed

OK. I live in an area where there are customers who are only accessible by boat or seaplane. I am trying to set up a system to run service calls from...

Duct Design Question

Hi! I have two bathrooms that are next to each other, and I'm trying to install a bathroom ventilation fan in each. One bathroom needs a 150 CFM fan (which has a 6" duct), and the other a 50 CFM (4" duct). I'd like to have to make only one opening in the roof for the cap, so I'd like to connect the exhaust of the two fans with a y-connector in the attic, and then go through the roof opening. Is it better to use a 6" roof cap, and a 6"-4"-6" y-connector (6" and 4" into 6")? Or am I better off searching for a 150 CFM fan that also has a 4" duct, so I can connect them with a 4"-4"-4" y-connector and vent it out through a 4" roof opening? Thank you!

Pentane

Hi all, I am having to work on a r23/r404a cascade system. The artificial load solenoid is sticking. Anyways, I am trying to locate a distributor...

Wheelchair users upset city council might put taxi reforms into reverse


Council set to reopen taxi debate next week.

invoice app

Does anyone have any suggestions for a simple invoice app for residential service purposes? I don't mind spending a little on something if it's...

Confused about wiring connections for new bath light

Hi I have an older home (1950s). Am trying to install new bath vanity light(replacing old vanity bar w/4 small bulbs). There is a light switch controlling light . I did not take pic or make diagram of previous connections.I did install an old work electrical box as the other wires were just coming out of hole in wall. Currently, this is what I have: two cables (each has B copper wire and W copper wire.) Also there is a single W wire separate from the others. I'm wondering if that is a ground wire? I have connected all B wires (2 from wall and 1 from new fixture) and did same with the 2 W that were in cable and 1 from new fixture . I attached the fixture ground to single W wire. I can get all 3 bulbs in new fixture to come on, but are not controlled by light switch, and it trips the breaker each time. Thoughts, or do I need to call an electrician. I have been able to determine the one of B wires is hot and other is not. Is the cold B part of switch?

Reigning in policing costs may take changes to law


Ontarians pay more for police than other Canadians. A sweeping report makes 31 recommendations to hold the line, including turning over many jobs to civilians.

warranty compressor hurdles.

have had two calls this week where going back to sites to recheck compressors over phone w/ manufacturers. had to call Westinghouse hotline and...

2 or 3 wire for welding hook up

Hi I'm going to install a 220 welder which comes with a 250 VAC 3-Prong Plug (6-50p). I need to install the corresponding 3 prong outlet. I know it requires 2 110 volt hot wires and a ground for the third prong (usually the green wire in a stove hookup). My question is whether I need to pay extra for the 3 wire or can I just use the un-insulated copper ground wire for the third prong (which does indeed require a ground connection) and just buy #6 - 2. Is the insulation important if the wire is hooked up as a ground? Thanks Elliot

Traveling to a different area for some interviews.

Okay, strange question... But, my first time relocating(or attempting to) in the trade. I was active duty before this(in the location I'm trying to...

Help I caused a leak! Understanding my multiple water heater plumbing..

So based on the advice in this thread http://www.doityourself.com/forum/plumbing-piping/546783-tapping-water-heater-supply-fridge-connection.html#post2409160 I closed the valves and started taking off the supposed vacuum breaker from one the closer tank. When water started coming out. I thought maybe that was normal and that the pressure would quickly go down it didn't. I also noticed that the cold water in pipe I was going to use for the ice maker was really hot even with the water heater off for a few hours. I then tried to relieve pressure by opening a faucet. Water came out piping hot and the other hot water tank burner kicked on which caused the cold water in pipe on the one I was working on to go cold. Of course the partially backed out vacuum breaker no longer has sealant on the threads and is slowly leaking :wall: I realized that I really don't have any idea of what's connected to what and what goes where.

Compressed wood table bumping noise

Hi there, I've got a compressed wood desk from IKEA, model name is Malm. And I usually type on a computer keyboard a lot on it, but for every character I type the table makes a very annoying bumping sound, like a drum. I guess its something related to the vibrations of my typing on the table's top plank. My question is, hoe do I stop this sound? I've tried putting a carpet bellow the table and even a thin cork panel on top, but it didn't stop the sound, which makes me believe its because of the top plank, that makes the sound resonate for some how. Here is the table model, for reference - MALM Desk - birch veneer - IKEA (http://www.ikea.com/us/en/catalog/products/30214151/) Can anyone help me please?

Have you seen what they're doing on PartsTown?

TechTown - techtown.partstown.com/welcome Looks like a lot of nubies, though...

food equipement technician

hye guys.am new to this thread . i do have 2 years hvac,i got a job from a commercial food equipement in GA.to do PM in restaurant food equip...

sequence for painting walls and trim

A friend just closed on their new (old) home (800 miles away) and they will be painting the entire inside before they move in. Currently has stained trim which they will be painting. I would normally mask everything and then paint ceiling and then walls, but where the trim will be painted I would hate to come back and mask with tape on the freshly painted walls. Plus I assume the trim should be primed. Sequence and advice needed. Bud

Oshawa mayor has change of heart about Lord's Prayer


Weeks after telling the Star he intended to keep opening meetings with the prayer, John Henry votes to end it, saying it’s a battle the city can’t win.

How to Build Simple Floating Shelves

Floating shelves are a simple solution to add extra storage space on the walls while maintaining a clean, minimal look. They also add interest to a blank wall and can be used to display framed pictures or decorative objects. Though they may look lik...

Rotted exterior shutters???

I have shutters on the exterior front windows and they are 10 years old and have began to rot on the bottom. I would like to cut off the bottoms and replace it with the same wood. Does any body know what type of wood this is? Its a little over a 1/2 inch thick. The picture upload is very confusing so i added them to photobucket. hopper28755's Library | Photobucket (http://s1028.photobucket.com/user/hopper28755/library/) Thank you

Correct Bit for Drilling Ceramics

My wife wants me to drill some very small holes into some decorative pieces of ceramic. I'd like the holes to be 1/16". I've been doing a ton of research online and there seems to be lots of opinions as to what kind of bit to use. Also, don't own a dremel tool which leaves me with a cordless drill driver or my friend's drill press. I should also add eventually I'm going to be asked to drill into glass. Can I get some advice on this - especially given the small size of the bits?

bypass humidifier installation issue

My bypass humidifier (Generalaire 900) has to be mounted on the return (cold) plenum. The instructions call for it to be supplied via a 6" pipe from...

In ground sprinkler basics - should heads be near the street aimed into lawn?

I have a 50 head system installed by a 'pro'. I paid him so I guess that makes him a pro. but beyond that, I have little faith in him / had an argument with him and not going to have him back (a key think I was worried about was that I have an aerator for my lawn tractor. as long as I avoid the heads, are the pipes deep enough? He told me yes... then I found a 3' length that was barely buried / visible on the surface. so if he can't get my main concern dealt with, what else did he screw up? ANyway.... Are the heads supposed to be near the street shooting into the lawn? Or more in the middle of the lawn shooting towards the street? They are about 1 - 2' from the street aiming towards the middle of the lawn. So there's 1 - 2' behind the heads that don't get water. he said its unavoidable - closer to the street (we don't have a curb / belgium blocks - the grass just ends and pavement starts) and he said they would be more likely to get driven over / chewed up by snow plows. your thoughts?

Carrier dealer says NEST is compatible

Hello, First time poster, but been reading your very informative posts over the past few weeks and thought you guys were the best source for...

Questions about Lennox system and upcoming install

I am about to sign a contract to have the system below installed. Thanks to all who advised me on my other thread regarding the 4 ton 2 stage setup...

Fuel Solenoid Piston

Should I be able to remove the piston from a fuel solenoid body? The piston moves up and down, and operates with the key. But, if I try to lift it completely out, is seems to get caught on something. It was completely frozen, but I used carb cleaner and got it moving. Does it need more cleaning? This is on a Craftsman 13.5 HP riding mower. The part number is 699915. Thanks,

Search Trends: Are Compound Queries the Start of the Shift to Data-Driven Search?

Posted by Tom-Anthony

The Web is an ever-diminishing aspect of our online lives. We increasingly use apps, wearables, smart assistants (Google Now, Siri, Cortana), smart watches, and smart TVs for searches, and none of these are returning 10 blue links. In fact, we usually don't end up on a website at all.

Apps are the natural successor, and an increasing amount of time spent optimising search is going to be spent focusing on apps. However, whilst app search is going to be very important, I don't think it is where the trend stops.

This post is about where I think the trends take us—towards what I am calling "Data-Driven Search". Along the way I am going to highlight another phenomenon: "Compound Queries". I believe these changes will dramatically alter the way search and SEO work over the next 1-3 years, and it is important we begin now to think about how that future could look.

App indexing is just the beginning

With App Indexing Google is moving beyond the bounds of the web-search paradigm which made them famous. On Android, we are now seeing blue links which are not to web pages but are deep links to open specific pages within apps:


This is interesting in and of itself, but it is also part of a larger pattern which began with things like the answer box and knowledge graph. With these, we saw that Google was shifting away from sending you somewhere else but was starting to provide the answer you were looking for right there in the SERPs. App Indexing is the next step, which moves Google from simply providing answers to enabling actions—allow you to do things.

App Indexing is going to be around for a while—but here I want to focus on this trend towards providing answers and enabling actions.

Notable technology trends

Google's mission is to build the "ultimate assistant"—something that anticipates your needs and facilitates fulfilling them. Google Now is just the beginning of what they are dreaming of.

So many of the projects and technologies that Google, and their competitors, are working on are converging with the trend towards "answers and actions", and I think this is going to lead to a really interesting evolution in searches—namely what I am calling "Data-Driven Search".

Let's look at some of the contributing technologies.

Compound queries: query revisions & chained queries

There is a lot of talk about conversational search at the moment, and it is fascinating for many reasons, but in this instance I am mostly interested in two specific facets:

  • Query revision
  • Chained queries

The current model for multiple queries looks like this:

You do one query (e.g. "recipe books") and then, after looking at the results of that search, you have a better sense of exactly what it is you are looking for and so you refine your query and run another search (e.g. "vegetarian recipe books"). Notice that you do two distinct searches—with the second one mostly completely separate from the first.

Conversational search is moving us towards a new model which looks more like this, which I'm calling the Compound Query model:

In this instance, after evaluating the results I got, I don't make a new query but instead a Query Revision which relates back to that initial query. After searching "recipe books", I might follow up with "just show me the vegetarian ones". You can already do this with conversational search:

Example of a "Query Revision"—one type of Compound Query

Currently, we only see this intent revision model working in conversational search, but I expect we will see it migrate into desktop search as well. There will be a new generation of searchers who won't have been "trained" to search in the unnatural and stilted keyword-oriented that we have. They'll be used to conversational search on their phones and will apply the same patterns on desktop machines. I suspect we'll also see other changes to desktop-based search which will merge in other aspects of how conversational search results are presented. There are also other companies working on radical new interfaces, such as Scinet by Etsimo (their interface is quite radical, but the problems it solves and addresses are ones Google will likely also be working on).

So many SEO paradigms don't begin to apply in this scenario; things like keyword research and rankings are not compatible with a query model that has multiple phases.

This new query model has a second application, namely Chained Queries, where you perform an initial query, and then on receiving a response you perform a second query on the same topic (the classic example is "How tall is Justin Bieber?" followed by "How old is he?"—the second query is dependent upon the first):

Example of a Chained Query—the second type of Compound Query

It might be that in the case of chained queries, the latter queries could be converted to be standalone queries, such that they don't muddy the SEO waters quite as much as as queries that have revisions. However, I'm not sure that this necessarily stands true, because every query in a chain adds context that makes it much easier for Google to accurately determine your intent in later queries.

If you are not convinced, consider that in the example above, as is often the case in examples (such as the Justin Bieber example), it is usually clear from the formulation that this is explicitly a chained query. However—there are chained queries where it is not necessarily clear that the current query is chained to the previous. To illustrate this, I've borrowed an example which Behshad Behzadi, Director of Conversational Search at Google, showed at SMX Munich last month:

Example of a "hidden" Chained Query—it is not explicit that the last search refers to the previous one.

If you didn't see the first search for "pictures of mario" before the second and third examples, it might not be immediately obvious that the second "pictures of mario" query has taken into account the previous search. There are bound to be far more subtle examples than this.

New interfaces

The days of all Google searches coming solely via a desktop-based web browser are already long since dead, but mobile users using voice search are just the start of the change—there is an ongoing divergence of interfaces. I'm focusing here on the output interfaces—i.e., how we consume the results from a search on a specific device.

The primary device category that springs to mind is that of wearables and smart watches, which have a variety of ways in which they communicate with their users:

  • Compact screens—devices like the Apple Watch and Microsoft Band have compact form factor screens, which allow for visual results, but not in the same format as days gone by—a list of web links won't be helpful.
  • Audio—with Siri, Google Now, and Cortana all becoming available via wearable interfaces (that pair to smart phones) users can also consume results as voice.
  • Vibrations—the Apple Watch can give users directions using vibrations to signal left and right turns without needing to look or listen to the device. Getting directions already covers a number of searches, but you could imagine this also being useful for various yes/no queries (e.g. "is my train on time?").

Each of these methods is incompatible with the old "title & snippet" method that made up the 10 blue links, but furthermore they are also all different from one another.

What is clear is that there is going to need to be an increase in the forms in which search engines can respond to an identical query, with responses being adaptive to the way in which the user will consume their result.

We will also see queries where the query may be "handed off" to another device: imagine me doing a search for a location on my phone and then using my watch to give me direction. Apple already has "Handover"which does this in various contexts, and I expect we'll see the concept taken further.

This is related to Google increasingly providing us with encapsulated answers, rather than links to websites—especially true on wearables and smart devices. The interesting phenomenon here is that these answers don't specify a specific layout, like a webpage does. The data and the layout are separated.

Which leads us to...

Cards

Made popular by Google Now, cards are prevalent in both iOS and Android, as well as on social platforms. They are a growing facet of the mobile experience:

Cards provide small units of information in an accessible chunk, often with a link to dig deeper by flipping a card over or by linking through to an app.

Cards exactly fit into the paradigm above—they are more concerned with the data you will see and less so about the way in which you will see it. The same cards look different in different places.

Furthermore, we are entering a point where you can now do more and more from a card, rather than it leading you into an app to do more. You can response to messages, reply to tweets, like and re-share, and all sorts of things all from cards, without opening an app; I highly recommend this blog post which explores this phenomenon.

It seems likely we'll see Google Now (and mobile search as it becomes more like Google Now) allowing you to do more and more right from cards themselves—many of these things will be actions facilitated by other parties (by way of APIs of schema.org actions). In this way Google will become a "junction box" sitting between us and third parties who provide services; they'll find an API/service provider and return us a snippet of data showing us options and then enable us to pass back data representing our response to the relevant API.

Shared screens

The next piece of the puzzle is "shared screens", which covers several things. This starts with Google Chromecast, which has popularised the ability to "throw" things from one screen to another. At home, any guests I have over who join my wifi are able to "throw" a YouTube video from their mobile phone to my TV via the Chromecast. The same is true for people in the meeting rooms at Distilled offices and in a variety of other public spaces.

I can natively throw a variety of things: photos, YouTube videos, movies on Netflix etc., etc. How long until that includes searches? How long until I can throw the results of a search on an iPad on to the TV to show my wife the holiday options I'm looking at? Sure we can do that by sharing the whole screen now, but how long until, like photos of YouTube videos, the search results I throw to the TV take on a new layout that is suitable for that larger screen?

You can immediately see how this links back to the concept of cards and interfaces outlined above; I'm moving data from screen to screen, and between devices that provide different interfaces.

These concepts are all very related to the concept of "fluid mobility" that Microsoft recently presented in their Productivity Future Vision released in February this year.

An evolution of this is if we reach the point that some people have envisioned, whereby many offices workers, who don't require huge computational power, no longer have computers at their desks. Instead their desks just house dumb terminals: a display, keyboard and mouse which connect to the phone in their pockets which provides the processing power.

In this scenario, it becomes even more usual for people to be switching interfaces "mid task" (including searches)—you do a search at your desk at work (powered by your phone), then continue to review the results on the train home on the phone itself before browsing further on your TV at home.

Email structured markup

This deserves a quick mention—it is another data point in the trend of "enabling action". It doesn't seem to be common knowledge that you can use structured markup and schema.org markup in emails, which works in both Gmail and Google Inbox.

Editor's note: Stay tuned for more on this in tomorrow's post!

The main concepts they introduce are "highlights" and "actions"—sound familiar? You can define actions that become buttons in emails allowing people to confirm, save, review, RSVP, etc. with a single click right in the email.

Currently, you have to apply to Google for them to whitelist emails you send out in order for them to mark the emails up, but I expect we'll see this rolling out more and more. It may not seem directly search-related but if you're building the "ultimate personal assistant", then merging products like Google Now and Google Inbox would be a good place to start.

The rise of data-driven search

There is a common theme running through all of the above technologies and trends, namely data:

  • We are increasingly requesting from Search Engines snippets of data, rather than links to strictly formatted web content
  • We are increasingly being provided the option for direct action without going to an app/website/whatever by providing a snippet of data with our response/request

I think in the next 2 years small payloads of data will be the new currency of Google. Web search won't go away anytime soon, but large parts of it will be subsumed into the data driven paradigm. Projects like Knowledge Vault, which aims to dislodge the Freebase/Wikipedia (i.e. manually curated) powered Knowledge Graph by pulling facts directly from the text of all pages on the web, will mean mining the web for parcels of data become feasible at scale. This will mean that Google knows where to look for specific bits of data and can extract and return this data directly to the user.

How all this might change the way users and search engines interact:

  1. The move towards compound queries will mean it becomes more natural for people to use Google to "interact" with data in an iterative process; Google won't just send us to a set of data somewhere else but will help us sift through it all.
  2. Shared screens will mean that search results will need to be increasingly device agnostic. The next generation of technologies such as Apple Handover and Google Chromecast will mean we increasingly pass results between devices where they may take on a new layout.
  3. Cards will be one part of making that possible by ensuring that results can rendered in various formats. Users will become more and more accustomed to interacting with sets of cards.
  4. The focus on actions will mean that Google plugs directly into APIs such that they can connect users with third party backends and enable that right there in their interface.

What we should be doing

I don't have a good answer to this—which is exactly why we need to talk about it more.

Firstly, what is obvious is that lots of the old facets of technical SEO are already breaking down. For example, as I mentioned above, things like keyword research and rankings don't fit well with the conversational search model where compound queries are prevalent. This will only become more and more the case as we go further down the rabbit hole. We need to educate clients and work out what new metrics help us establish how Google perceive us.

Secondly, I can't escape the feeling that APIs are not only going to increase further in importance, but also become more "mainstream". Think how over the years ownership of company websites started in the technical departments and migrated to marketing teams—I think we could see a similar pattern with more core teams being involved in APIs. If Google wants to connect to APIs to retrieve data and help users do things, then more teams within a business are going to want to weigh in on what it can do.

APIs might seem out of the reach and unnecessary for many businesses (exactly as websites used to...), but structured markup and schema.org are like a "lite API"—enabling programmatic access to your data and even now to actions available via your website. This will provide a nice stepping stone where needed (and might even be sufficient).

Lastly, if this vision of things does play out, then much of our search behaviour could be imagined to be a sophisticated take on faceted navigation—we do an initial search and then sift through and refine the data we get back to drill down to the exact morsels we were looking for. I could envision "Query Revision" queries where the initial search happens within Google's index ("science fiction books") but subsequent searches happen in someone else's, for example Amazon's, "index" ('show me just those with 5 stars and more than 10 reviews that were released in the last 5 years').

If that is the case, then what I will be doing is ensuring that Distilled's clients have a thorough and accurate "indexes" with plenty of supplementary information that users could find useful. A few years ago we started worrying about ensuring our clients' websites have plenty of unique content, and this would see us worrying about ensuring they have a thorough "index" for their product/service. We should be doing that already, but suddenly it isn't going to be just a conversion factor, but a ranking factor too (following the same trend as many other signals, in that regard)

Discussion

Please jump in the comments, or tweet me at @TomAnthonySEO, with your thoughts. I am sure many of the details for how I have envisioned this may not be perfectly accurate, but directionally I'm confident and I want to hear from others with their ideas.


Sign up for The Moz Top 10, a semimonthly mailer updating you on the top ten hottest pieces of SEO news, tips, and rad links uncovered by the Moz team. Think of it as your exclusive digest of stuff you don't have time to hunt down but want to read!

Desperatly Need help with Trane LON XIF files

I'm not extremely familiar with LON, as 99.9% of my jobs are Bacnet so bear with me. I have been looking all over and can't seem to put my hands...

Shower bench question

I would like to know if it is feasible to build a shower bench using concrete blocks in a shower that is already tiled. If so, how?

is Christie on to something here

http://www.nj.com/politics/index.ssf/2015/04/christie_wants_social_security_as_emergency_povert.html#incart_most-commented_middlesex_article OR: ...

Repointing a Stone Foundation

Hi there, I've been a lurker for a while on this great forum, but now in need of a specific DIY. Just purchased an 1890 3 family home which needs some random repointing of the stone foundation. There are spots of crack and there are spots where the mortar is missing. So I have a few questions to the experts... -Can I do this myself or should I get a professional? I have basic experience in DIY, but have never tackled something like this specifically. -What are the basic steps? Can I just chisel the old stuff out and slap on some mortar? -What kind of mortar do I need to use? Consistency should be fairly thick I assume?

Mayor John Tory wants to "open doors" for new affordable housing


The plot of land at 200 Madison Ave. has been vacant for 10 years. Mayor John Tory says the city can create better conditions to build there and across the city.

Tory Bilt blower will not stay runnig

Have a Troy Bilt TB320BV. Wouldn't start. Replaced reed, diaphragm, and gaskets. Thoroughly cleaned carb (twice). Checked to make sure fuel lines are routed correctly. Now it will run for 4 -5 seconds then die. I'm thinking new carb, but wanted to give a shout out to see if there might be something I missed. Any ideas? Thanks!

commercial subcontractor crews needed

i am in need of commercial subcontractor crews for jobs in the South East. Need to be able to start and finish job 100%. sheetmetal and ductboard. ...

Find Your Strategy: 6 Actionable Social Media Strategies from Successful Brands

Being great on social media isn’t always intuitive. Sometimes the best way to learn is to get inspired by the what others are doing.

Late last year, Kapost compiled a list of 2014’s top brands in content. Much of what has made many of these brands successful is their social media strategies.

Let’s learn from six of them here. Whether they’re inspiring their audience through a shared philosophy or learning with their fans and followers by sharing data and studies, these brands—both small and large—have found the winning ...

The post Find Your Strategy: 6 Actionable Social Media Strategies from Successful Brands appeared first on Social.